Milwaukee
Milwaukee Tool Composite Folding Rule
- SKU:
- MLW48-22-3801
- Availability:
- Usually Ships Same Day
- Weight:
- 0.31 LBS
Description
DUTY®
Composite Folding Rule
Measure, lay out and mark · Match the tool to the surface and task
Product Overview
This composite folding rule extends to 6-1/2 feet and folds down for carrying between tasks.
Heat-stamped markings and laminated blades aid reading, while embedded joints lock in place.
- Measuring length6-1/2 feet.
- Blade constructionComposite laminate.
- Scale markingsHeat stamped.
- Joint positions0, 90 and 180 degrees.
Technical Specifications
- Overall reach
- 6-1/2 ft
- Blade construction
- Composite laminate
- Markings
- Heat stamped
- Locking positions
- 0°, 90°, 180°
- Reference angles
- 22.5°, 30°, 45°, 60°
- Rule type
- Imperial folding
Choose the Correct Fit
Choose the rule type and scale that match the drawing. Fully open the sections needed for the measurement and ensure the joints are seated before reading the scale.
Reference angle markings help with common conduit bend angles. Treat them as layout aids and verify the actual setup rather than assuming the rule is a bending tool.
Installation & Care
Keep the joint areas clear of dirt and fold the sections without twisting them sideways. Wipe the laminated blades clean and dry before storage.
Inspect for damaged joints, worn markings or bent sections before use. A joint that does not seat correctly can change a measurement even when the scale is readable.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help choosing a layout or marking tool? Tell us the task, surface and measuring system.
Important Product Questions
How far does it extend?
The exact catalog model is listed as a 6-1/2-foot folding rule.
Which joint angles lock?
The manufacturer lists locking positions at 0, 90 and 180 degrees.
What reference bend angles are marked?
The family catalog lists 22.5-, 30-, 45- and 60-degree reference angles. Confirm the selected angle and work setup before using the mark.
