Milwaukee
Milwaukee Tool AIR-TIP Pivoting Extension Wand
- SKU:
- MLW49-90-2031
- Availability:
- Usually Ships Same Day
- Weight:
- 0.84 LBS
Description
DUTY®
AIR-TIP Pivoting Extension Wand
Exact-model vacuum accessory · Match the listed interface and cleaning task
Product Overview
This extension wand pivots 90 degrees for overhead or low access. Five detent positions set the angle.
A button controls the joint and it locks in position. The output tip holds 1-1/4-inch vacuum accessories.
- Pivot joint90-degree positioning range.
- Five detentsSelectable joint positions.
- Button controlReleases the pivot joint.
- Accessory outputAccepts 1-1/4-inch ends.
Technical Specifications
- Hose-side fit
- 1-1/4 / 1-7/8 / 2-1/2 in
- Accessory-side fit
- 1-1/4 in
- Pivot range
- 90°
- Detent positions
- 5
- Joint control
- Button release
- Joint retention
- Locks in position
Choose the Correct Fit
Milwaukee lists 1-1/4, 1-7/8, 2-1/2 inch wet/dry vacuum hose connections for this exact accessory. Confirm the physical connection before use; nominal size does not resolve every proprietary hose end.
The inlet supports the listed three hose sizes, but the accessory end is specifically 1-1/4 inch. Select the correct attachment and confirm both connections before reaching overhead.
Installation & Care
Turn off and disconnect the vacuum before changing or clearing accessories. Inspect the connection and cleaning edge before use.
Remove lodged debris without damaging the tool or connection. Use the vacuum, collection setup and cleaning procedure approved for the material being picked up.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help choosing a vacuum accessory? Share model 49-90-2031, your application and the accessories you need for the job.
Important Product Questions
Which hose connection is listed?
This exact model is listed for 1-1/4, 1-7/8, 2-1/2 inch wet/dry vacuum hose connections. Check the connection and the vacuum requirements rather than assuming every hose or adapter will fit.
Does the outlet accept all three hose diameters?
No. The vacuum-hose side is listed for 1-1/4, 1-7/8 and 2-1/2 inch connections. The accessory output is specifically for 1-1/4 inch vacuum accessories.
How should the cleaning edge be maintained?
Switch off the vacuum before servicing the attachment. Remove trapped debris and inspect the edge or bristles; test a hidden area before use on a delicate finish.
