Milwaukee
Milwaukee Tool AIR-TIP Magnetic Utility Nozzle
- SKU:
- MLW49-90-2032
- Availability:
- Usually Ships Same Day
- Weight:
- 0.88 LBS
Description
DUTY®
AIR-TIP Magnetic Utility Nozzle
Exact-model vacuum accessory · Match the listed interface and cleaning task
Product Overview
This utility nozzle has magnetic strips at the front and back. They catch responsive metal hardware.
A black zinc coating protects the magnets. Use the handheld nozzle for targeted cleanup.
- Magnetic stripsLocated at front and back.
- Hardware captureCatches magnetic hardware.
- Magnet coatingBlack zinc finish.
- Use positionDesigned for handheld use.
Technical Specifications
- Hose connections
- 1-1/4 / 1-7/8 / 2-1/2 in
- Magnet position
- Front / back
- Magnet coating
- Black zinc
- Pickup detail
- Magnetic hardware
- Use position
- Handheld
- Tool type
- Utility nozzle
Choose the Correct Fit
Milwaukee lists 1-1/4, 1-7/8, 2-1/2 inch wet/dry vacuum hose connections for this exact accessory. Confirm the physical connection before use; nominal size does not resolve every proprietary hose end.
Guide the handheld nozzle around the pickup area. Clear captured hardware from the magnetic strips before it obstructs the opening.
Installation & Care
Turn off and disconnect the vacuum before changing or clearing accessories. Inspect the connection and cleaning edge before use.
Remove lodged debris without damaging the tool or connection. Use the vacuum, collection setup and cleaning procedure approved for the material being picked up.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help choosing a vacuum accessory? Share model 49-90-2032, your application and the accessories you need for the job.
Important Product Questions
Which hose connection is listed?
This exact model is listed for 1-1/4, 1-7/8, 2-1/2 inch wet/dry vacuum hose connections. Check the connection and the vacuum requirements rather than assuming every hose or adapter will fit.
Will the magnets capture every kind of debris?
No. The strips catch hardware that responds to the magnets; they do not separate every material or replace the vacuum filter. Inspect and clear the strips with the vacuum off.
How should the cleaning edge be maintained?
Switch off the vacuum before servicing the attachment. Remove trapped debris and inspect the edge or bristles; test a hidden area before use on a delicate finish.
