Milwaukee
Milwaukee Tool AIR-TIP Conduit Line Puller Kit
- SKU:
- MLW49-90-2024
- Availability:
- Usually Ships Same Day
- Weight:
- 2.32 LBS
Description
DUTY®
AIR-TIP Conduit Line Puller Kit
Exact-model vacuum accessory · Match the listed interface and cleaning task
Product Overview
This line-puller kit uses three tips to seal different conduit sizes. Rubber cones support suction fit.
The two smaller tips flex into tight boxes or panels. A cross stopper helps keep the line out of the vacuum.
- Three conduit tipsMatch the conduit size.
- Flexible small tipsReach restricted boxes.
- Rubber cone sealSupports suction fitment.
- Cross stopperLimits line and bag entry.
Technical Specifications
- Hose connections
- 1-1/4 / 1-7/8 / 2-1/2 in
- Conduit tips
- 3
- Small-tip range
- 1/2–1 in conduit
- Medium-tip range
- 1-1/4–1-1/2 in conduit
- Large-tip range
- 2–4 in conduit
- Seal material
- Rubber
Choose the Correct Fit
Milwaukee lists 1-1/4, 1-7/8, 2-1/2 inch wet/dry vacuum hose connections for this exact accessory. Confirm the physical connection before use; nominal size does not resolve every proprietary hose end.
Distinguish the vacuum-hose connection from the conduit size. Select the tip for 1/2–1, 1-1/4–1-1/2 or 2–4 inch conduit and prepare the line-pulling setup as instructed.
Installation & Care
Turn off and disconnect the vacuum before changing or clearing accessories. Inspect the connection and cleaning edge before use.
Remove lodged debris without damaging the tool or connection. Use the vacuum, collection setup and cleaning procedure approved for the material being picked up.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help choosing a vacuum accessory? Share model 49-90-2024, your application and the accessories you need for the job.
Important Product Questions
Which hose connection is listed?
This exact model is listed for 1-1/4, 1-7/8, 2-1/2 inch wet/dry vacuum hose connections. Check the connection and the vacuum requirements rather than assuming every hose or adapter will fit.
Are conduit sizes the same as hose sizes?
No. The three tips serve the listed conduit ranges. The vacuum-side connection is separately listed for 1-1/4, 1-7/8 and 2-1/2 inch wet/dry vacuum hoses.
What is included?
The manufacturer lists three conduit tips: one flexible tip for 1/2–1 inch conduit, one flexible tip for 1-1/4–1-1/2 inch conduit, and one tip for 2–4 inch conduit.
