Milwaukee
Milwaukee Tool AIR-TIP 2-in-1 Utility Brush Tool
- SKU:
- MLW49-90-2028
- Availability:
- Usually Ships Same Day
- Weight:
- 0.57 LBS
Description
DUTY®
AIR-TIP 2-in-1 Utility Brush Tool
Exact-model vacuum accessory · Match the listed interface and cleaning task
Product Overview
This utility tool uses a sliding brush for two cleaning approaches. Deploy the bristles or use the bare end.
A button releases the brush and it locks in position. Choose the end for the surface and debris.
- Sliding brushDeploys at the cleaning end.
- Positive lockHolds the brush in place.
- Two approachesBristled or bare-end use.
- Agitating bristlesLoosen surface debris.
Technical Specifications
- Hose connections
- 1-1/4 / 1-7/8 / 2-1/2 in
- Cleaning ends
- Bare / bristled
- Brush movement
- Sliding
- Brush control
- Button release
- Brush retention
- Locks in position
- Brush action
- Debris agitation
Choose the Correct Fit
Milwaukee lists 1-1/4, 1-7/8, 2-1/2 inch wet/dry vacuum hose connections for this exact accessory. Confirm the physical connection before use; nominal size does not resolve every proprietary hose end.
Choose the bristled end for agitation or the bare end when bristles are not needed. Confirm the sliding brush is locked before cleaning, and test delicate finishes first.
Installation & Care
Turn off and disconnect the vacuum before changing or clearing accessories. Inspect the connection and cleaning edge before use.
Remove trapped grit from the bristles before contact with a finished surface. Test a small hidden area first and clean the tool according to its instructions.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help choosing a vacuum accessory? Share model 49-90-2028, your application and the accessories you need for the job.
Important Product Questions
Which hose connection is listed?
This exact model is listed for 1-1/4, 1-7/8, 2-1/2 inch wet/dry vacuum hose connections. Check the connection and the vacuum requirements rather than assuming every hose or adapter will fit.
Does the brush stay on the tool?
The brush slides into its working position and locks. It can be slid back to use the non-bristled end without changing to a different cleaning tool.
How should the cleaning edge be maintained?
Switch off the vacuum before servicing the attachment. Remove trapped debris and inspect the edge or bristles; test a hidden area before use on a delicate finish.
