Milwaukee
Milwaukee Tool 9in1 Punchdown Multi-Bit Screwdriver
- SKU:
- MLW48-22-2902
- Availability:
- Usually Ships Same Day
- Weight:
- 0.59 LBS
Description
DUTY®
9-in-1 Punchdown
Multi-Bit Driver
Combine screwdriving, nut-driving and 110/66 punchdown work in one cushion-grip hand tool.
Product Overview
A reversible 110/66 punchdown blade joins four common screw tips and three nut drivers.
An anti-peel cushion handle supports hand use. The wrench-ready bolster aids fastening.
- Punchdown choiceDual-sided 110/66 blade.
- Cushion gripAnti-peel handle design.
- Fastening optionsScrew tips and nut drivers.
- Replaceable blade110/66 replacement available.
Technical Specifications
- Punchdown blade
- 110 / 66
- Phillips tips
- #1 and #2
- Slotted tips
- 3/16 and 1/4 in
- Nut-driver sizes
- 1/4, 3/8, 1/2 in
- Handle
- Anti-peel cushion
- Wrench interface
- Bolster
Choose the Correct Fit
Match the 110 or 66 blade to the termination block and follow its wiring and punchdown procedure.
Select the correct screw or nut-driver size for fastening. Do not use the punchdown blade as a screwdriver.
Installation & Care
Disconnect the relevant equipment before work and keep the blade aligned with the termination slot.
Inspect the blade and driving tips for wear. Fit the specified replacement blade when the punchdown edge is damaged.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need a punchdown setup? Tell Willy the termination block format and the screw and nut sizes used alongside it.
Important Product Questions
Which punchdown blocks is the blade for?
The supplied dual-sided blade provides 110 and 66 formats. Match the side and orientation to the actual block and follow its termination instructions.
What replacement punchdown blade is listed?
Milwaukee lists replacement 110/66 blade 48-22-2167 for this driver.
Which fastening tips are included?
Phillips #1 and #2; slotted 3/16 and 1/4 in; and 1/4, 3/8 and 1/2 in nut drivers. A loop maker is also listed.
