Milwaukee
Milwaukee Tool 9" 6 TPI THE WRECKER with Carbide Teeth SAWZALL Blade 5 PK
- SKU:
- MLW48-00-5542
- Availability:
- Usually Ships Same Day
- Weight:
- 0.55 LBS
Description
DUTY®
9 in WRECKER
Carbide Blade
A 9-inch, 6 TPI carbide blade for demolition that moves between wood and thick metal.
Product Overview
The 9 in WRECKER uses a 6 TPI tooth pattern for mixed-material demolition and remodeling.
Its 1 in tall body supports aggressive cuts. The Fang Tip helps start plunge cuts in wood.
- Mixed materialsFrom wood to cast iron.
- Carbide teethBuilt for demolition.
- Wood plunge tipFang Tip aids entry.
- Large gulletsHelp clear cutting chips.
Technical Specifications
- Blade length
- 9 in
- Tooth pitch
- 6 TPI
- Tooth material
- Carbide
- Body height
- 1 in
- Tang
- 1/2 in universal
- Plunge tip
- Fang Tip
Choose the Correct Fit
Check for concealed cables, pipework and fasteners before cutting. Support the work and keep the area behind the cut clear.
Match the blade to every material in the cut. The Fang Tip plunge-cutting claim applies to wood; check the saw’s instructions first.
Installation & Care
Disconnect power before changing blades. Follow the saw’s clamp instructions and check that the blade is secure.
Let the blade cool before handling. Clear debris and replace blades with cracks, bends or damaged cutting edges.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help choosing a blade? Tell Willy the material, its thickness, your saw model and available cutting clearance.
Important Product Questions
Which materials can this WRECKER cut?
Milwaukee specifies clean wood through thick metals, including cast iron. Check the material, thickness and access before choosing a demolition blade.
Does the Fang Tip allow plunge cuts in metal?
The stated plunge-cutting application is wood. Do not transfer that claim to metal; use the entry method specified by the saw manufacturer.
How much cutting depth does the blade length allow?
Nominal blade length is not a cutting-depth rating. Choose enough reach to extend beyond the work through the full saw stroke, and leave clearance behind it.
