Milwaukee
Milwaukee Tool 8PCSHOCKWAVE Impact Duty 3/4" Drive SAE Deep 6 Point Socket Set
- SKU:
- MLW49-66-7018
- Availability:
- Usually Ships Same Day
- Weight:
- 15.94 LBS
Description
DUTY®
8-Piece SAE
Impact Socket Set
An 8-piece 3/4-inch drive impact set with 8 deep sockets for SAE fasteners.
Product Overview
This 8-piece set pairs a 3/4-inch square drive with SAE deep six-point sockets.
Selected openings span 1–1-1/2 in; check the complete size list below for the fasteners you use.
- Readable sizingInk-filled size markings.
- Secure attachmentDual holes and groove.
- Non-slip hexHelps resist rounding.
- Nesting storageImpact-resistant case.
Technical Specifications
- Drive size
- 3/4 in
- SAE range
- 1–1-1/2 in
- Fastener fit
- 6-point
- Depth
- Deep
- Material
- Forged steel
- Storage
- Nesting case
Choose the Correct Fit
Check the listed SAE sizes against your fasteners. The size range summarizes the set and does not promise every intermediate size.
Match the 3/4-inch square drive to your impact tool or adapter. Seat the socket fully and verify retention before use.
Installation & Care
Choose the depth to suit the fastener recess and any protruding stud. Check clearance for both the socket body and the attached tool.
Clean and inspect sockets after use. Keep the set together and replace any socket with cracks, distortion or badly worn corners.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help choosing a socket set? Tell Willy your drive size, fastener sizes and access needs so the GetPipe team can check the coverage.
Important Product Questions
Which socket sizes are included?
SAE: 1, 1-1/16, 1-1/8, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2 inches.
Does the piece count equal the socket count?
This set contains 8 deep sockets.
Will the sockets fit any impact tool?
They use a 3/4-inch square drive. Match that drive and the retaining arrangement to your tool; an adapter does not remove the tool or accessory limits.
