Milwaukee
Milwaukee Tool 5/8" Forstner Bit
- SKU:
- MLW48-14-0626
- Availability:
- Usually Ships Same Day
- Weight:
- 0.16 LBS
Description
DUTY®
Forstner
Flat-Bottom Bit
Make 5/8 in flat-bottom recesses, overlapping holes or edge holes in wood with this Forstner bit.
Product Overview
The 5/8 in head uses precision-ground kerf cutters to form a clean, accurate wood opening.
A polished finish suits flat-bottom holes; the round shank helps reduce drilling runout.
- Fine kerf cuttersSmooth hole outline.
- Round shankHelps limit bit runout.
- Flat-bottom holesForms flat-based recesses.
- Edge-hole cuttingOverlapping/edge holes.
Technical Specifications
- Hole diameter
- 5/8 in
- Cutters
- Fine kerf teeth
- Shank style
- Round
- Surface finish
- Polished
- Hole base
- Flat bottom
- Work material
- Wood
Choose the Correct Fit
Mark the hole location and desired depth before drilling. Use a depth stop when a recess must not pass through.
Clamp the work securely, especially for overlapping or edge holes where the cutter is not surrounded by material.
Installation & Care
Match the round shank to the chuck and use the speed recommended for the bit diameter and wood.
Clear chips with the tool stopped, then allow the bit to cool before cleaning and inspecting the cutters.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need a Forstner bit for a recess or edge hole? Tell Willy the diameter, depth and wood being worked.
Important Product Questions
Can it make overlapping holes?
Yes. This Forstner design is intended for overlapping holes as well as pocket holes and holes at an edge. Clamp the work securely.
Is a flat-bottom hole automatically a through-hole?
No. Set the drilling depth for a blind recess and allow for the center point before approaching the back face.
Can I use it in a quick-change hex holder?
The shank is round. Use a compatible drill chuck rather than assuming it fits a hex-only accessory holder.
