Milwaukee
Milwaukee Tool 4" BIG HAWG with Carbide Teeth
- SKU:
- MLW49-56-9245
- Availability:
- Usually Ships Same Day
- Weight:
- 1.58 LBS
Description
DUTY®
BIG HAWG
Carbide Hole Saw
Make 4 in rough-in openings in nail-embedded wood and abrasive building materials.
Product Overview
Three carbide teeth make rough 4 in cuts through nail-embedded wood and cement board.
A thick backer supports the cup; enlarged braze joints strengthen the carbide-tooth bond.
- Three carbide teethAggressive rough cutting.
- Plug-access slotsHelp release the core.
- Thick backerSupports the saw cup.
- Large braze jointsSupport the tooth bond.
Technical Specifications
- Hole diameter
- 4 in
- Tooth count
- 3
- Tooth material
- Carbide
- Backer
- Thickened
- Plug removal
- Access slots
- Tooth attachment
- Enlarged braze area
Choose the Correct Fit
Check the opening size, framing clearances and permitted drilling location. Nail resistance does not make hidden wiring or structural hardware safe to cut.
Fit the correct BIG HAWG arbor and a pilot appropriate to the material. Confirm the drill’s capacity for the saw diameter.
Installation & Care
Brace the drill and secure loose work. Follow the tool’s speed instructions and stop if the cutter binds.
Disconnect power before clearing the cup. Inspect the carbide teeth, brazed joints and pilot after hitting embedded metal.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help matching a hole saw? Tell Willy the opening diameter, material thickness and drill or arbor you plan to use.
Important Product Questions
Can this saw cut wood that contains nails?
Yes. Nail-embedded wood is a specified application, along with shingles, cement board, plaster and stucco. Check for other concealed objects before cutting.
Can I use the clean-wood pilot in abrasive material?
Choose the pilot for the actual material. A clean-wood pilot is intended for clean wood; use the compatible multi-material pilot for abrasive work.
Does this replace a finish-cutting hole saw?
Choose it for aggressive rough-in openings. If the exposed edge needs a fine finish, select the cutting tool and method specified for that material.
