Milwaukee
Milwaukee Tool 3/8" Drive T40 TORX Bit Socket
- SKU:
- MLW45-34-1014
- Availability:
- Usually Ships Same Day
- Weight:
- 0.08 LBS
Description
DUTY®
T40 TORX
Bit Socket
A T40 TORX bit socket in a slim-profile format, matched to a 3/8-inch square-drive hand tool.
Product Overview
Match the T40 TORX tip to the recess; seat it fully before applying hand-tool force.
Align the 3/8-inch drive tool with the socket and allow room for the handle’s full stroke.
- Anti-roll flatsHelps resist rolling.
- Wrench-ready shapeWrench-compatible flats.
- Slim accessNarrow socket profile.
- Protected surfaceRust-resistant chrome.
Technical Specifications
- Drive size
- 3/8 in
- Bit size
- T40
- Tip style
- TORX
- Construction
- One-piece
- Size marking
- Laser-engraved
- Finish
- Chrome-plated
Choose the Correct Fit
Match the T40 TORX tip to the recess. Clear debris so the bit can seat fully before turning the fastener.
Connect the socket to a 3/8-inch drive hand tool and check retention. Keep the tool aligned with the fastener during use.
Installation & Care
Check surrounding clearance for the socket body and your handle before applying force. Avoid levering sideways against the bit.
Wipe the bit and drive clean after use. Inspect the tip for wear or twisting and replace a damaged socket before continuing.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help choosing a bit socket? Tell Willy the fastener type, size and access restrictions so the GetPipe team can check the fit.
Important Product Questions
How do I choose the right bit size?
Use this socket only where the T40 TORX tip seats fully without excessive play. Do not substitute a nearby size for a damaged or dirty recess.
Can the bit be removed and replaced?
This is a one-piece socket design, with the bit integrated into the base. Choose a replacement socket if the bit becomes damaged.
Will a wrench work on the outside?
Yes. The FOUR FLAT outer sides are wrench-ready. Select a wrench that fits the flats snugly and keep force aligned with the fastener.
