Milwaukee
Milwaukee Tool 3/4"X10" SDS PLUS FLAT CHISEL (1-PK)
- SKU:
- MLW48-62-6015
- Availability:
- Usually Ships Same Day
- Weight:
- 0.55 LBS
Description
DUTY®
SDS-Plus
Flat Chisel
Use the 3/4 in wide flat chisel for general chipping and breaking.
Product Overview
The 3/4 in wide flat tip serves general chipping and breaking; overall length is 10 in.
Match the SDS-Plus shank to the holder, allowing clearance for both hammer and accessory.
- Matched profileFlat working profile.
- Forged steelDurable steel body.
- Hammer connectionSDS-Plus holder fit.
- Overall length10 in total length.
Technical Specifications
- Working width
- 3/4 in
- Overall length
- 10 in
- Connection
- SDS-Plus
- Tip profile
- Flat
- Body material
- Forged steel
- Work areas
- Heat-treated
Choose the Correct Fit
Choose the flat profile for general chipping and breaking. Confirm the removal area before starting.
Confirm the hammer accepts the SDS-Plus connection and has enough clearance for the complete tool.
Installation & Care
Isolate the hammer before fitting the accessory. Check retention and select hammer-only mode before starting.
Check for concealed services and control flying debris and dust. Let the accessory cool, then inspect it for cracks or damage.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help matching a demolition accessory? Send Willy the hammer model, holder type, material and removal task.
Important Product Questions
Which hammer connection does it require?
Use a matching SDS-Plus holder. A similar-looking shank does not establish compatibility; check the hammer’s accessory instructions.
What work is this profile intended for?
It is intended for general chipping and breaking. Choose a profile suited to the material and required finish.
How should I check it before reuse?
Inspect the working end, body and connection for damage. Clean it using the tool maker’s method and replace cracked, bent or badly worn accessories.
