Milwaukee
Milwaukee Tool 20" CLAY SPADE
- SKU:
- MLW48-62-4030
- Availability:
- Usually Ships Same Day
- Weight:
- 9.97 LBS
Description
DUTY®
Demolition
Clay Spade
Use the 5-1/2 in wide clay spade tool for clay / packed gravel / dirt.
Product Overview
The spade profile digs into clay, packed gravel and dirt. Its 5-1/2 in blade suits soil removal.
The 1-1/8 in collared hex shank matches a suitable hammer. Overall length is 20 in for reach and clearance planning.
- Matched profileClay spade tip for the task.
- Forged constructionSteel body for durability.
- Hammer connectionFits the listed 1-1/8 in collared hex holder.
- Working reach20 in overall length.
Technical Specifications
- Working width
- 5-1/2 in
- Overall length
- 20 in
- Connection
- 1-1/8 in collared hex
- Tip profile
- Clay spade
- Body material
- Forged steel
- Retention
- Collar with notch
Choose the Correct Fit
Match the clay spade profile to clay / packed gravel / dirt. Do not use it on concrete or asphalt.
Confirm the hammer accepts the 1-1/8 in collared hex connection and has enough clearance for the complete tool.
Installation & Care
Isolate the hammer before fitting the accessory. Check retention and follow the hammer’s accessory operating instructions.
Check for concealed services and control flying debris and dust. Let the accessory cool, then inspect it for cracks or damage.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help matching a demolition accessory? Send Willy the hammer model, holder type, material and removal task.
Important Product Questions
Which hammer connection does it require?
Use a matching 1-1/8 in collared hex holder. A similar-looking shank does not establish compatibility; check the hammer’s accessory instructions.
Can I use it to break a concrete slab?
No. A clay spade is intended for soil excavation. Use a concrete-demolition accessory for that work.
How should I check it before reuse?
Inspect the working end, body and connection for damage. Clean it using the tool maker’s method and replace cracked, bent or badly worn accessories.
