Milwaukee
Milwaukee Tool 18" Bolt Cutter
- SKU:
- MLW48-22-4018
- Availability:
- Usually Ships Same Day
- Weight:
- 3.39 LBS
Description
DUTY®
18" Bolt
Cutters
An 18-inch bolt cutter with forged-steel blades, adjustable blade alignment and separate limits of 3/8 inch at up to 31 HRC or 1/4 inch at up to 48 HRC.
Product Overview
Select by stock diameter and hardness; the larger capacity requires the lower HRC limit.
Adjust blades as instructed and support the stock to keep the offcut under control.
- Forged bladesForged steel cutting edges.
- Blade adjustmentAdjustable blade setting.
- Pivot securityBolt-lock pivot hardware.
- Comfort handlesCovered handle grips.
Technical Specifications
- Nominal length
- 18 in
- Soft/medium limit
- 3/8 in at ≤31 HRC
- Hard-stock limit
- 1/4 in at ≤48 HRC
- Blade material
- Forged steel
- Blade setting
- Adjustable
- Handle grip
- Comfort
Choose the Correct Fit
Identify the stock material, diameter and hardness before selecting the cutter. Use the capacity associated with that hardness.
Check blade alignment and adjust it according to the manufacturer’s instructions. Do not force a damaged or misaligned cutting head.
Installation & Care
Support the work, wear eye protection and keep others clear of the possible path of the cut end.
Apply controlled hand force with the intended handles. Do not add pipe extensions or use the tool for material outside its verified limits.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help choosing? Tell Willy your material, required size and working clearance so the GetPipe team can check the fit.
Important Product Questions
Can I use the larger diameter limit on hard stock?
No. The 3/8-inch limit is for material up to 31 HRC. For stock up to 48 HRC, the listed maximum is 1/4 inch; both diameter and hardness must comply.
What if the stock hardness is unknown?
Establish the material and hardness before cutting, or use a method with a verified rating for that stock. Appearance and diameter alone are not enough.
Can handle extensions increase the cutting capacity?
No. Added leverage does not change the blade rating and can overload the tool. Use a cutter rated for the material rather than extending the handles.
