Milwaukee
Milwaukee Tool 12" 3 TPI The AX with Carbide Teeth for Pruning & Clean Wood SAWZALL Blade 1PK
- SKU:
- MLW48-00-5233
- Availability:
- Usually Ships Same Day
- Weight:
- 0.15 LBS
Description
DUTY®
12 in AX Carbide
Pruning Blade
A 12-inch, 3 TPI blade for pruning, clean wood and root-removal work above or below ground.
Product Overview
The 12 in blade pairs coarse 3 TPI teeth with a low profile for root-removal access.
Carbide teeth tolerate abrasive dirt and sand. Large gullets help keep wood debris moving out.
- Coarse tooth pitch3 TPI for clean wood.
- Low profileDesigned for root access.
- Abrasive resistanceCarbide for dirt and sand.
- Large gulletsHelp limit wood buildup.
Technical Specifications
- Blade length
- 12 in
- Tooth pitch
- 3 TPI
- Tooth material
- Carbide
- Body profile
- Low
- Tang
- 1/2 in universal
- Gullets
- Large
Choose the Correct Fit
Choose this blade for clean wood and pruning. For roots, locate buried services and clear the intended cut before starting.
Check that the 12 in blade has enough reach for the full stroke. Do not treat its nominal length as a branch-diameter rating.
Installation & Care
Disconnect power before changing blades. Follow the saw’s clamp instructions and check that the blade is secure.
Let the blade cool before handling. Clear debris and replace blades with cracks, bends or damaged cutting edges.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Planning a pruning or root cut? Tell Willy the wood size, access, saw model and whether buried services are nearby.
Important Product Questions
Can it cut roots below ground?
Yes. The low profile and carbide teeth are intended for root removal around abrasive soil. Locate buried utilities and remove loose obstructions before cutting.
Can I use it for nail-embedded demolition?
This version is specified for pruning and clean wood. Choose a blade explicitly rated for embedded fasteners when nails or screws are present.
How much cutting depth does the blade length allow?
Nominal blade length is not a cutting-depth rating. Choose enough reach to extend beyond the work through the full saw stroke, and leave clearance behind it.
