Milwaukee
Milwaukee Tool 1-1/8" SDS Plus Rotary Hammer Kit
- SKU:
- MLW5268-21
- Availability:
- Usually Ships Same Day
- Weight:
- 12.85 LBS
Description
DUTY®
1-1/8 in SDS-Plus
Rotary Hammer Kit
Use corded power for concrete drilling with an 8 amp SDS-Plus rotary hammer.
Product Overview
The 8 amp motor delivers 3.6 ft-lb of impact energy. Variable speed supports drilling control.
It has a metal gear case and mechanical clutch, plus a side handle, depth rod and carrying case.
- Corded motor8 amp power source.
- Mechanical clutchProtects against bit binding.
- Vibration controlAVS reduces felt vibration.
- Chisel positioningAdjusts the working orientation.
Technical Specifications
- Concrete capacity
- 1-1/8 in
- Tool holder
- SDS-Plus
- Motor current
- 8 A
- Speed
- 0–1,500 rpm
- Impact rate
- 0–5,500 bpm
- Impact energy
- 3.6 ft-lb
Choose the Correct Fit
Match the bit diameter and required drilling depth to the hammer’s capacity and anchor instructions.
Check the power supply and extension-cord requirements in the manual. Set up the side handle before use.
Installation & Care
Unplug the hammer before changing accessories. Check retention and select the appropriate operating mode.
Locate hidden services and use the required dust controls. Inspect the cord and allow hot accessories to cool after work.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help choosing a corded hammer? Send Willy the hole size, material, available power supply and dust-control setup.
Important Product Questions
What comes with this hammer kit?
The manufacturer lists the rotary hammer, side handle, depth rod and carrying case. Choose drilling or chiseling accessories for the job.
What does the mechanical clutch do?
It helps protect the motor when a bit binds. Keep a firm two-handed grip and follow the operating manual; the clutch does not eliminate the need for control.
Can I change a bit while the hammer is plugged in?
Unplug the tool before fitting or removing accessories. Let hot bits cool and confirm that the new shank is retained before reconnecting power.
