Empire Industries
Fig. 189 Double Bolt Pipe Clamp
- SKU:
- Fig. 189
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
Fig. 189 Double Bolt Pipe Clamp
Empire Fig. 189 Double Bolt Pipe Clamp is designed for the suspension of insulated pipe lines.
The Fig. 189 is normally used with the Fig. 13 Weldless Eye Nut. Available material and finish options include plain carbon steel, hot-dip galvanized, T-304 stainless steel, and T-316 stainless steel.
Product Highlights
- Designed for suspension of insulated pipe lines
- Double bolt pipe clamp design
- Normally used with Fig. 13 Weldless Eye Nut
- Available in plain carbon steel, hot-dip galvanized, T-304 stainless steel, and T-316 stainless steel
- Spacer used for 4" pipe sizes and above
- Domestically manufactured
Technical Specifications
| Manufacturer | Empire Industries |
|---|---|
| Figure | 189 |
| Product Type | Double Bolt Pipe Clamp |
| Service | Suspension of Insulated Pipe Lines |
| Plain Carbon Steel | Fig. 189B |
| Hot-Dip Galvanized | Fig. 189HDG |
| T-304 Stainless Steel | Fig. 189SS |
| T-316 Stainless Steel | Fig. 189SX |
| Typical Related Component | Fig. 13 Weldless Eye Nut |
| Spacer | Used for 4" Pipe Sizes and Above |
Service & Installation
The Fig. 189 is designed specifically for suspension of insulated pipe lines and is normally used with a Fig. 13 Weldless Eye Nut.
For pipe sizes 4" and above, the manufacturer specifies the use of a spacer.
Standards & Approvals
The Fig. 189 complies with the following specifications and standards:
- Federal Specification WW-H-171-E, Type 3
- Federal Specification A-A-1192A, Type 3
- MSS SP-58, Type 3
- MSS SP-69, Type 3
Ordering Information
When ordering, specify the figure number, finish, and pipe size. Refer to the Empire Fig. 189 submittal for pipe O.D., bolt size, dimensions, individual weights, and maximum recommended loads.
Review the Empire Fig. 189 submittal for dimensional data, pipe O.D., bolt sizes, weights, and maximum recommended loads. Use the pipe chart for additional pipe diameter and wall thickness reference information.
Frequently Asked Questions
What is the Fig. 189 Double Bolt Pipe Clamp designed for?
The Fig. 189 is designed for the suspension of insulated pipe lines.
What is normally used with the Fig. 189 pipe clamp?
The Fig. 189 is normally used with the Fig. 13 Weldless Eye Nut.
What material and finish options are available?
The manufacturer submittal lists plain carbon steel (189B), hot-dip galvanized (189HDG), T-304 stainless steel (189SS), and T-316 stainless steel (189SX).
When is a spacer used?
A spacer is used for 4" pipe sizes and above.
What standards does the Fig. 189 comply with?
The manufacturer submittal lists Federal Specification WW-H-171-E Type 3, A-A-1192A Type 3, MSS SP-58 Type 3, and MSS SP-69 Type 3.
Important Ordering Notes
Specify the figure number, finish, and pipe size when ordering. Use the manufacturer submittal to verify the required pipe O.D., bolt size, dimensions, weight, and maximum recommended load for the selected size. A spacer is used for 4" pipe sizes and above.
