Merit Brass
Carbon Press Male Adapters
- SKU:
- MBCPMA
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
CarbonPress® Carbon Steel Press Male Adapter
CarbonPress® Carbon Steel Press Male Adapters provide a transition from a carbon steel press connection to a male threaded connection. They are designed for applications where CarbonPress® piping must connect to threaded valves, equipment, fittings, or other female-threaded components.
CarbonPress® is a 1/2" through 2" carbon steel press fitting system suitable for use with black iron, epoxy-coated, and galvanized Schedule 10 through Schedule 40 carbon steel pipe. When pressed, an internal grab ring grips the outside diameter of the pipe while an elastomeric sealing element creates a leak-tight seal.
CarbonPress® fittings can be installed using Milwaukee or RIDGID press tools with the associated jaws or rings designed for carbon steel applications.
Product Highlights
- Carbon steel press male adapter
- Transitions from press piping to a male threaded connection
- Designed for connection to compatible female-threaded components
- Part of the CarbonPress® carbon steel press fitting system
- Designed for 1/2" through 2" piping systems
- Suitable for black iron, epoxy-coated, and galvanized carbon steel pipe
- Compatible with Schedule 10 through Schedule 40 carbon steel pipe
- Grab ring mechanically secures the fitting to the pipe after pressing
- Elastomeric sealing element provides a leak-tight seal
- Leak Before Press (LBP) Technology
- EPDM and HNBR sealing options
- Compatible with Milwaukee or RIDGID press tools and associated carbon steel jaws/rings
- 15-year limited warranty
CarbonPress® Connection Technology
When the press end is installed, a grab ring deforms and its sharp edges grip the outside diameter of the pipe, securing the fitting axially and helping prevent movement.
At the same time, an elastomeric sealing element impinges on the pipe to create a leak-tight connection.
Male Adapter Design
The adapter combines a CarbonPress® press connection with a male threaded connection, allowing compatible carbon steel press pipe to transition to valves, equipment, couplings, or fittings with a female-threaded connection.
Leak Before Press Technology
CarbonPress® fittings incorporate Leak Before Press (LBP) Technology, helping identify connections that have not been properly pressed during system testing.
Technical Specifications
| Product Type | Male Adapter |
|---|---|
| System | CarbonPress® |
| Connection Type | Press x Male Thread |
| Function | Transition from Carbon Steel Press Pipe to Female-Threaded Components |
| Size Range | 1/2" - 2" |
| Compatible Pipe | Black Iron, Epoxy-Coated & Galvanized Carbon Steel Pipe |
| Compatible Pipe Schedules | Schedule 10 - Schedule 40 |
| Sealing Options | EPDM or HNBR |
| EPDM Temperature Range | -40°F to 300°F (-40°C to 148°C) |
| HNBR Temperature Range | -40°F to 200°F (-40°C to 93°C) |
| Press Technology | Leak Before Press (LBP) |
| Compatible Tool Brands | Milwaukee & RIDGID |
| EPDM Certification | IAPMO Z 1117 |
| HNBR Certification | IAPMO/ANSI LC 4 / CSA 6.32 |
| Warranty | 15-Year Limited Warranty |
EPDM & HNBR Seal Options
- EPDM: -40°F to 300°F (-40°C to 148°C)
- HNBR: -40°F to 200°F (-40°C to 93°C)
Select the sealing element appropriate for the intended system and application.
Pipe Compatibility
CarbonPress® is suitable for use with:
- Black iron carbon steel pipe
- Epoxy-coated carbon steel pipe
- Galvanized carbon steel pipe
- Schedule 10 through Schedule 40 pipe
- Pipe sizes from 1/2" through 2"
Press Tool Compatibility
CarbonPress® fittings can be pressed using Milwaukee or RIDGID tools with the associated jaws or rings intended for carbon steel press applications.
Applications
Press technology has a multi-decade history of use in applications including:
- Hydronic heating systems
- Fire sprinkler systems
- Fluid conveyance
- Gas conveyance
- Oil systems
- Low-pressure steam
Seal selection, threaded-component compatibility, and system requirements should be verified for the specific application.
Certifications & Warranty
- EPDM: IAPMO Z 1117
- HNBR: IAPMO/ANSI LC 4 / CSA 6.32
- Warranty: 15-Year Limited Warranty
Selection & Application Guidance
- Select the press size to match the carbon steel pipe.
- Select the male threaded size to match the mating female-threaded component.
- Verify the pipe is within the supported Schedule 10 through Schedule 40 range.
- Confirm whether EPDM or HNBR is appropriate for the intended application.
- Verify temperature and media compatibility before installation.
- Use an appropriate thread sealant on the threaded connection.
- Use compatible Milwaukee or RIDGID press tools with the appropriate carbon steel jaws or rings.
- Follow the applicable CarbonPress® installation requirements when preparing and pressing the connection.
Important Ordering Notes
- CarbonPress® carbon steel press male adapter.
- Press x male threaded connection.
- Designed for 1/2" through 2" carbon steel piping systems.
- Suitable for black iron, epoxy-coated, and galvanized pipe.
- Compatible with Schedule 10 through Schedule 40 carbon steel pipe.
- EPDM and HNBR sealing options have different temperature ratings and certifications.
- Leak Before Press (LBP) Technology.
- 15-year limited warranty.
- Confirm both press size and male threaded size before ordering.
- Verify pipe schedule, seal material, and application requirements before installation.
Product Documents
Frequently Asked Questions
What is a CarbonPress® male adapter used for?
It is used to transition from a CarbonPress® carbon steel piping system to a compatible female-threaded valve, fitting, coupling, or equipment connection.
What connections does the adapter have?
The fitting combines a CarbonPress® press connection with a male threaded connection.
What pipe can CarbonPress® fittings be used with?
CarbonPress® is suitable for black iron, epoxy-coated, and galvanized Schedule 10 through Schedule 40 carbon steel pipe.
What sizes does the CarbonPress® system cover?
The CarbonPress® system covers sizes from 1/2" through 2".
What is the EPDM temperature range?
The EPDM temperature range is -40°F to 300°F (-40°C to 148°C).
What is the HNBR temperature range?
The HNBR temperature range is -40°F to 200°F (-40°C to 93°C).
Do CarbonPress® fittings have Leak Before Press technology?
Yes. CarbonPress® fittings incorporate Leak Before Press (LBP) Technology.
What press tools can be used with CarbonPress®?
CarbonPress® fittings can be pressed with Milwaukee or RIDGID tools and the associated jaws or rings for carbon steel applications.
What warranty is provided?
CarbonPress® fittings have a 15-year limited warranty.
Ask Willy: Product Selection & Support
Our GetPipe.com team can help review sizing, material, connection requirements, and product information before you order.
