Merit Brass
Brass 2-PC 600# NPT Full Port Ball Valve - Lead Free
- SKU:
- NLVB206FP
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
Brass 2-PC 600# NPT Full Port Ball Valve - Lead Free
Brass 2-PC 600# NPT Full Port Ball Valves - Lead Free provide dependable quarter-turn shutoff for compatible threaded piping systems while meeting lead-free requirements. The full-port design helps minimize flow restriction, and the two-piece forged lead-free brass body provides durable construction for commercial, industrial, and potable-water applications where applicable.
The valve features PTFE seats, a blow-out-proof stem, locking handle device, and size-dependent ball construction. Sizes from 1/4" through 1" use a chrome-plated lead-free brass ball, while 1-1/4" through 2" sizes use a 304 stainless steel ball. The valve is rated to 600 PSI non-shock WOG from 1/4" through 2" and is approved to NSF 61 and ANSI 372.
Product Highlights
- Two-piece forged lead-free brass body
- Full-port design
- Female NPT threaded connections
- Locking handle device
- Chrome-plated lead-free brass ball on 1/4" through 1" sizes
- 304 stainless steel ball on 1-1/4" through 2" sizes
- PTFE valve seats
- Blow-out-proof stem
- 600 PSI non-shock WOG rating from 1/4" through 2"
- Threaded ends conform to ANSI B1.20.1
- Conforms to MSS-SP-110
- CSA gas approved through 2" for IPS sizes only
- NSF 61 approved
- ANSI 372 approved
- Country of origin: Taiwan
Technical Specifications
| Product Type | 2-Piece Full Port Ball Valve |
|---|---|
| Body Material | Forged Lead-Free Brass |
| Lead Status | Lead Free |
| Port Style | Full Port |
| Body Design | Two Piece |
| Connection Type | Female NPT |
| Ball - 1/4" to 1" | Chrome Plated Lead-Free Brass |
| Ball - 1-1/4" to 2" | 304 Stainless Steel |
| Seat Material | PTFE |
| Stem Design | Blow-Out Proof |
| Handle | Lever Handle with Locking Device |
| Operation | Quarter Turn |
| Pressure Rating | 600 PSI Non-Shock WOG, 1/4" through 2" |
| Valve Standard | MSS-SP-110 |
| Thread Standard | ANSI B1.20.1 |
| Gas Approval | CSA Approved Through 2" for IPS Sizes Only |
| Lead-Free Approvals | NSF 61 and ANSI 372 |
| Country of Origin | Taiwan |
Two-Piece Full Port Construction
A two-piece ball valve uses a valve body assembled from two primary sections. The forged lead-free brass construction provides the pressure-containing body while securely housing the ball, seats, stem, and operating components.
The full-port design maintains a large internal flow passage through the valve, helping minimize restriction and pressure loss when compared with reduced-port configurations.
The ball rotates through 90 degrees between the open and closed positions for quick quarter-turn shutoff.
Ball Construction by Valve Size
1/4" Through 1"
- Chrome-plated lead-free brass ball
- Full-port configuration
- PTFE seats
- Quarter-turn operation
- 600 PSI non-shock WOG rating
1-1/4" Through 2"
- 304 stainless steel ball
- Full-port configuration
- PTFE seats
- Quarter-turn operation
- 600 PSI non-shock WOG rating
Valve Components & Features
Full-Port Flow Path
- Designed to minimize internal flow restriction
- Helps reduce pressure loss through the valve
- Useful where maintaining flow capacity is important
- Provides straight-through flow when fully open
- Suitable for compatible piping systems
PTFE Seats
- PTFE sealing surfaces
- Support smooth ball rotation
- Provide dependable shutoff
- Used throughout the valve size range
- Verify media compatibility before use
Blow-Out-Proof Stem
- Designed to resist stem ejection from internal pressure
- Supports safe valve operation
- Integral part of the valve pressure-containing assembly
- Provides dependable quarter-turn control
- Designed for compatible commercial and industrial service
Locking Handle
- Lever-style operating handle
- Includes a locking device
- Provides clear open and closed positioning
- Allows valve position to be secured when required
- Useful for controlled piping applications
Lead-Free Approvals
- NSF 61 Approved: Listed by the supplied product information as meeting NSF 61 requirements.
- ANSI 372 Approved: Listed as meeting ANSI 372 lead-content requirements.
- Forged Lead-Free Brass Body: Valve body is specifically identified as lead-free brass.
- Lead-Free Ball Construction: Sizes 1/4" through 1" use chrome-plated lead-free brass balls.
Standards & Approvals
- MSS-SP-110: Valve conforms to MSS-SP-110.
- ANSI B1.20.1: Threaded ends conform to ANSI B1.20.1.
- CSA Gas Approval: Approved through 2" for IPS sizes only.
- NSF 61: Approved.
- ANSI 372: Approved.
- Country of Origin: Taiwan.
Full Port vs. Reduced Port Ball Valve
Full Port
- Larger internal flow opening
- Helps minimize flow restriction
- Helps reduce pressure drop through the valve
- Useful where flow capacity is important
- Used in this valve design
Reduced Port
- Smaller internal opening than the connected pipe
- Introduces additional flow restriction
- May have a more compact valve body
- Used where maximum flow area is not required
- Different internal configuration from a full-port valve
Common Applications
Plumbing & Commercial Piping
- Compatible potable-water systems
- General water piping
- Mechanical piping systems
- Fixture and equipment isolation
- Threaded piping installations
Industrial & Gas Service
- Process piping shutoff
- Equipment isolation
- Utility piping systems
- Compatible gas piping through approved sizes
- Applications requiring full-port flow
Installation & Selection Guidance
- Confirm the required nominal valve size before ordering.
- Verify female NPT thread compatibility with the mating piping.
- Confirm that the 600 PSI non-shock WOG rating is appropriate for the intended application.
- Verify ball material for the selected valve size.
- Confirm media compatibility with the forged lead-free brass body, ball material, PTFE seats, and other wetted components.
- Use an appropriate thread sealant for the system media, pressure, and temperature.
- Apply thread sealant according to the sealant manufacturer's instructions.
- Use appropriate valve wrenching surfaces during installation.
- Avoid applying excessive installation torque to the valve body.
- Verify CSA gas approval requirements when used for gas service.
- Confirm pressure and temperature requirements before installation.
- Installation should comply with applicable piping codes and project requirements.
Product Documents
Merit Brass Lead Free Ball Valve Cut Sheet
Review manufacturer specifications, construction information, pressure ratings, dimensions, approvals, and additional technical information for the lead-free brass ball valve product line.
Pipe Chart: Common Diameters & Wall Thicknesses
Reference common nominal pipe diameters and wall thickness information when selecting compatible piping components.
Need Help Selecting a Lead-Free Brass Full Port Ball Valve?
Our industrial PVF specialists can help review your valve size, NPT connection, media, pressure, gas-service requirements, lead-free requirements, and ball material before you order.
Frequently Asked Questions
Is this ball valve lead free?
Yes. The valve has a forged lead-free brass body and is listed as NSF 61 and ANSI 372 approved.
What is the pressure rating?
Sizes from 1/4" through 2" are rated for 600 PSI non-shock WOG.
What does full port mean?
A full-port valve uses a large internal flow opening designed to help minimize restriction and pressure loss through the valve.
What type of connections does the valve use?
The valve uses threaded NPT end connections conforming to ANSI B1.20.1.
What material is the ball?
Sizes from 1/4" through 1" use a chrome-plated lead-free brass ball. Sizes from 1-1/4" through 2" use a 304 stainless steel ball.
What material are the seats?
The valve uses PTFE seats.
Does the valve use a blow-out-proof stem?
Yes. The supplied product information identifies the stem as blow-out proof.
Does the handle include a locking device?
Yes. The supplied product information states that the valve handle includes a locking device.
Is this valve CSA approved for gas service?
Yes. The supplied information states that it is CSA gas approved through 2" for IPS sizes only.
Does this valve conform to MSS-SP-110?
Yes. The supplied product information states that the valve conforms to MSS-SP-110.
What lead-free approvals does this valve have?
The supplied product information identifies the valve as NSF 61 and ANSI 372 approved.
Where is this valve manufactured?
The supplied product information identifies the country of origin as Taiwan.
Important Ordering Notes
- Product is a lead-free brass 2-piece 600# NPT full port ball valve.
- Forged lead-free brass body.
- Full-port configuration.
- Two-piece body design.
- Female NPT threaded ends.
- Locking handle device.
- Chrome-plated lead-free brass ball on 1/4" through 1" sizes.
- 304 stainless steel ball on 1-1/4" through 2" sizes.
- PTFE seats.
- Blow-out-proof stem.
- 1/4" through 2" sizes rated for 600 PSI non-shock WOG.
- Threaded ends conform to ANSI B1.20.1.
- Conforms to MSS-SP-110.
- CSA gas approved through 2" for IPS sizes only.
- NSF 61 and ANSI 372 approved.
- Country of origin: Taiwan.
- Confirm valve size, pressure, media, thread compatibility, and ball material before ordering.
- Refer to the manufacturer cut sheet for additional specifications and dimensional information.
