Spears
6" Schedule 80 CPVC 30° Elbow (SOC)
- SKU:
- 815-060C
- Availability:
- Usually Ships Same Day
- Weight:
- 5.89 LBS
Description
6" Schedule 80 CPVC 30° Elbow (SOC)
6" Schedule 80 CPVC 30° Elbow (SOC) provides a 30-degree direction change in compatible Schedule 80 CPVC piping. The 6" fitting uses socket connections on both ends for solvent-cement joining to compatible CPVC pipe.
The Schedule 80 CPVC 30° elbow provides a moderate directional transition where a piping layout requires less change than a 45° or 90° elbow. Selection should account for the 6" nominal size, socket compatibility, required 30° angle, piping alignment, system conditions, and proper CPVC joining procedures.
Product Highlights
- CPVC construction
- 6" nominal size
- Schedule 80 design
- 30° elbow configuration
- Two socket connections
- Provides a 30° direction change
- Designed for compatible CPVC pipe
- Designed for solvent-cement CPVC joining
Technical Specifications
| Product Type | 30° Elbow |
|---|---|
| Material | CPVC |
| Schedule | Schedule 80 |
| Nominal Size | 6" |
| Configuration | 30° Elbow |
| Connection | Socket (SOC) x Socket (SOC) |
| Socket Interface | Compatible CPVC Pipe |
| Direction Change | 30° |
| Joining Method | CPVC Solvent-Cement Connections |
| Primary Function | Provide a 30° Direction Change in Compatible 6" CPVC Piping |
30° Elbow Design
The 30° elbow design provides a moderate directional change within a 6" Schedule 80 CPVC piping run. It can be used where the piping layout requires more angular change than a slight-offset elbow but less than a 45° or 90° turn.
The required 30° angle and fitting orientation should be confirmed before installation. Both socket ends should match the 6" nominal size of the adjoining compatible CPVC pipe.
Socket Connections
The socket connections accept compatible 6" CPVC pipe at both ends of the elbow. These interfaces provide solvent-cement joints for integrating the fitting into the piping run.
Pipe ends and fitting sockets should be clean and properly prepared before assembly. Compatible CPVC primer, solvent cement, insertion procedures, and required cure times should be followed for both connections.
30° Direction Change
The 30-degree configuration changes the piping direction without creating the sharper turn associated with a 45° or 90° elbow. This provides another layout option for routing compatible Schedule 80 CPVC piping.
Proper orientation should be established before solvent-cement joining because adjustment becomes limited after assembly. Adjoining 6" piping should also be properly aligned and supported.
Schedule 80 CPVC Application
A 6" Schedule 80 CPVC 30° Elbow provides a molded directional connection for compatible CPVC piping systems. Its two socket ends are designed for solvent-cement joining to appropriately sized CPVC pipe.
System temperature, pressure, fluid compatibility, joining requirements, and applicable installation standards should be reviewed for the intended application. Proper piping support should be maintained around the fitting.
Installation & Selection Considerations
- Confirm the 6" size.
- Verify both socket connections.
- Confirm the 30° angle.
- Check orientation before joining.
- Maintain proper piping alignment and support.
Our piping specialists can help review the 6" size, socket connections, required 30° angle, CPVC pipe compatibility, joining requirements, and installation alignment before you order.
Frequently Asked Questions
What is a 6" Schedule 80 CPVC 30° Elbow used for?
It provides a 30-degree direction change within compatible 6" Schedule 80 CPVC piping.
What does SOC mean?
SOC identifies a socket connection designed to accept compatible CPVC pipe for solvent-cement joining.
How many socket connections does this elbow have?
The fitting has two socket connections designed for compatible 6" CPVC pipe.
Why use a 30° elbow?
It provides a moderate directional change where the piping layout does not require a sharper 45° or 90° turn.
How are the socket connections joined?
The sockets are designed for compatible CPVC solvent-cement joining using appropriate preparation, joining materials, and cure procedures.
What should I confirm before ordering?
Confirm the 6" nominal size, Schedule 80 CPVC construction, socket configuration, 30° angle, and adjoining pipe compatibility.
Important Ordering & Installation Notes
- Confirm the 6" size.
- Verify both socket connections.
- Confirm the 30° angle.
- Check orientation before installation.
- Use compatible CPVC joining procedures.
