Spears
3" PVC DWV Wye & 45 Degree Bend Combo w/ 2" R+L Side Inlets
- SKU:
- P517-338
- Availability:
- Usually Ships Same Day
- Weight:
- 2.45 LBS
Description
3" PVC DWV Wye & 45 Degree Bend Combo w/ 2" R+L Side Inlets
3" PVC DWV Wye & 45 Degree Bend Combo w/ 2" R+L Side Inlets combines an angled branch connection and 45-degree bend within one compatible PVC drain, waste, and vent fitting. The fitting also incorporates 2" right- and left-side inlets for additional branch connections.
The 3" wye and 45 degree bend combination with 2" right and left side inlets provides a multi-directional connection within compatible PVC DWV piping. Selection should account for the 3" main size, both 2" side inlets, adjoining pipe, fitting orientation, joining requirements, piping alignment, support, and available installation clearance.
Product Highlights
- PVC construction
- DWV fitting design
- 3" nominal main size
- Wye and 45° bend combination
- Includes 2" right and left side inlets
- Provides multiple branch connections
- Connects compatible PVC DWV pipe sections
- Combines an angled branch, 45-degree bend, and dual side inlets
Technical Specifications
| Product Type | Wye & 45° Bend Combination with Side Inlets |
|---|---|
| Material | PVC |
| System Type | DWV |
| Main Size | 3" |
| Side Inlet Size | 2" |
| Side Inlet Position | Right & Left |
| Fitting Configuration | Wye & 45° Bend Combination |
| Connection Interface | Compatible PVC DWV Pipe |
| Joining Method | Compatible PVC DWV Joining Procedure |
| Directional Configuration | Angled Branch with 45° Bend |
| Piping Configuration | Multi-Directional Branch Connection |
| Primary Function | Provide a Wye and 45-Degree Bend Transition with Additional 2" Right and Left Side Inlets |
Wye & 45° Bend Design
The wye and 45-degree bend configuration combines an angled branch and directional transition within one PVC DWV fitting. This arrangement provides a compact method of routing compatible drainage piping through a multi-directional connection.
The fitting orientation should be established before permanent joining so the branch, bend, and both side inlets correspond with the intended piping layout. Planning the position helps coordinate adjoining pipe, nearby fittings, support, and available working clearance.
2" Right & Left Side Inlets
The 2" right and left side inlets provide two additional branch connections from opposite sides of the fitting body. Each opening should be matched to appropriately sized compatible PVC DWV pipe before permanent assembly.
The side inlet positions should be confirmed before installation so both branches align with the intended piping route. Proper preparation, compatible joining materials, and careful alignment help establish the connections without unnecessary stress on the fitting.
PVC DWV Integration
The PVC DWV construction allows the combination fitting to integrate into compatible drain, waste, and vent piping arrangements requiring multiple directional connections. Matching the 3" main size and 2" side inlets to the adjoining PVC pipe helps maintain the intended piping configuration.
Application suitability should be evaluated using the requirements of the complete DWV system. Adjoining materials, connection compatibility, joining materials, piping support, slope where applicable, and local installation requirements should all be considered during fitting selection.
Multi-Directional Configuration
A 3" PVC DWV Wye & 45 Degree Bend Combo with 2" Right and Left Side Inlets combines several directional functions within one fitting body. This can simplify piping layouts where multiple compatible lines must connect near the same location.
Installation planning should consider the main connection, angled branch, 45-degree bend, both side inlet positions, adjoining pipe alignment, nearby fittings, available clearance, and piping support. Connected piping should align naturally without forcing the fitting into position.
Installation & Selection Considerations
- Confirm the 3" main size.
- Verify both 2" side inlets.
- Check PVC DWV compatibility.
- Confirm all branch orientations.
- Set the fitting position before assembly.
Our PVC fitting specialists can help review the 3" main size, both 2" side inlets, DWV requirements, adjoining PVC pipe, branch orientation, joining requirements, piping alignment, support requirements, and available installation clearance before you order.
Frequently Asked Questions
What is this PVC DWV combination fitting used for?
It combines a wye branch, 45-degree bend, and additional right- and left-side inlets within one compatible PVC DWV fitting.
What is the main fitting size?
The main fitting size is specified as 3".
What size are the side inlets?
Both additional side inlets are specified as 2".
Where are the additional side inlets located?
The fitting includes one 2" inlet on the right side and one 2" inlet on the left side.
Does fitting orientation matter?
Yes. The fitting should be positioned so the wye, 45-degree bend, and both side inlets correspond with the intended piping layout.
What should I confirm before ordering?
Confirm the 3" main size, both 2" side inlets, PVC DWV compatibility, and required fitting orientation.
Important Ordering & Installation Notes
- Inspect all connections before use.
- Confirm the 3" main size.
- Verify both 2" side inlets.
- Prepare adjoining pipe correctly.
- Set all branch orientations before assembly.
