United Pipe & Steel
Threaded Rod - Zinc Plated 10' Ft.
- SKU:
- ATRZ
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
- Note:
- Sold by the 10' Length
- Shipping Notice:
- LTL Only
Description
Zinc-Plated All-Thread Rod — 10-Foot Lengths
Zinc-plated all-thread rod in 10-foot lengths provides a continuous threaded fastening solution for commercial, industrial, plumbing, electrical, HVAC, construction, and maintenance applications. The full-length threading allows the rod to be cut to the required length and used with compatible nuts, washers, couplings, anchors, and support hardware.
Select the required rod diameter from the product options above. The selected variation determines the item number, diameter, thread size, online selling price, weight, cost, and other size-specific product information.
Product Highlights
- Continuous threading along the full 10-foot rod length
- Zinc-plated finish
- Designed for use with compatible threaded nuts, washers, couplings, and accessories
- Can be cut into shorter threaded sections as required
- Suitable for hanging, supporting, fastening, bracing, and anchoring applications
- May be formed or bent for specialized fastening applications when permitted by the project requirements
- Commonly used to fabricate anchor bolts and U-bolts
- Suitable for plumbing, electrical, HVAC, construction, and industrial applications
- Supplied in 10-foot lengths
- Distributed by Merfish United
Technical Specifications
| Product Type | Fully Threaded Rod |
|---|---|
| Material | Steel |
| Finish | Zinc Plated |
| Rod Length | 10 Feet |
| Threading | Continuous Full-Length Thread |
| Configuration | Straight Threaded Rod |
| Distributor | Merfish United |
| Available Diameters | Select from the Product Options Above |
| Common Accessories | Nuts, Washers, Coupling Nuts, Anchors, Clamps, Hangers, and Support Hardware |
| Common Industries | Plumbing, Electrical, HVAC, Construction, Industrial, and Maintenance |
Continuous Full-Length Threading
The rod is threaded continuously from end to end, allowing nuts, coupling nuts, washers, and compatible hardware to be positioned along the length as needed. The 10-foot configuration can be used as supplied or cut into shorter sections for project-specific fastening and support requirements.
Common Uses
Pipe and Mechanical Support
- Pipe hanger assemblies
- Mechanical equipment supports
- Trapeze support systems
- HVAC duct supports
- Ceiling-mounted supports
- Suspended utility systems
Fastening and Fabrication
- Equipment anchoring
- Structural fastening
- Electrical support systems
- Maintenance and repair work
- Fabricated anchor bolts
- Fabricated U-bolts
Zinc-Plated Finish
The zinc-plated surface provides a clean, corrosion-resistant finish for compatible indoor and protected applications. Suitability depends on the installation environment, exposure conditions, required strength, applicable specifications, and project requirements.
Cutting and Fabrication
All-thread rod can be cut to the required length using suitable tools and procedures. After cutting, the threaded end may require cleaning or dressing before installing nuts or coupling hardware. Rod may also be bent or formed for specialized fasteners when permitted by the rod grade, project specifications, applicable standards, and fabrication requirements.
Product Resources
Review the available Merfish United and Vulcan documentation for product information, certifications, safety documentation, and supplier information before ordering or fabrication.
Need Help Selecting All-Thread Rod?
Our industrial PVF specialists can help confirm the required diameter, thread size, rod length, finish, fastening hardware, support configuration, quantity, and product availability.
Frequently Asked Questions
How long is each threaded rod?
Each rod is supplied in a 10-foot length.
Is the rod threaded for its entire length?
Yes. This is all-thread rod with continuous threading along the full rod length.
Can the rod be cut into shorter pieces?
Yes. The rod can be cut into shorter threaded sections using suitable cutting tools and procedures. The cut end may need to be cleaned or dressed before installing threaded hardware.
Can this threaded rod be used with coupling nuts?
Yes. It can be used with compatible coupling nuts, standard nuts, washers, anchors, and support hardware that match the selected rod diameter and thread.
What is the zinc-plated finish used for?
The zinc-plated finish provides added corrosion resistance and a clean surface for compatible indoor or protected applications. Confirm suitability for the actual environment before installation.
Can the rod be bent to make anchor bolts or U-bolts?
Many threaded rod products can be bent or formed for specialized fasteners. Confirm that the selected rod grade, diameter, fabrication method, and finished part meet the applicable project requirements before bending.
What applications commonly use all-thread rod?
Common applications include pipe supports, trapeze hangers, HVAC supports, electrical supports, equipment anchoring, suspended utility systems, construction fastening, and maintenance work.
Are nuts and washers included?
Nuts, washers, coupling nuts, and other accessories should be treated as separate items unless the selected product variation specifically states that they are included.
How do I select the correct diameter?
Choose the rod diameter and thread that match the connecting hardware, load requirements, support system, drawings, specifications, and applicable codes.
Important Ordering Notes
- Select the required rod diameter before adding the product to your cart.
- The selected variation determines the item number, diameter, thread size, price, weight, and cost.
- Each rod is supplied in a 10-foot length.
- Nuts, washers, coupling nuts, anchors, and support accessories are sold separately unless otherwise stated.
- Confirm the rod diameter and thread compatibility with all mating hardware before ordering.
- Verify load requirements, rod grade, finish, installation environment, and applicable specifications before use.
- Cut ends may require cleaning or thread dressing before installing nuts or coupling hardware.
- Use appropriate personal protective equipment when cutting, bending, or fabricating threaded rod.
- Do not bend or fabricate the rod unless the selected material and application permit it.
- Support loads must be calculated and approved for the complete assembly, not only the threaded rod.
- Zinc plating does not make the rod suitable for every corrosive, outdoor, chemical, or marine environment.
- Installation and fabrication should be completed by qualified personnel in accordance with applicable plans, specifications, codes, and standards.
