Tigre
SDR35 Gasketed 22.5° Elbow - Gasket x Gasket
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
SDR35 Gasketed 22.5° Elbow - Gasket x Gasket
The SDR35 Gasketed 22.5° Elbow provides a 22.5-degree change in direction for compatible SDR35 PVC sewer and drainage piping. Also known as a 1/16 bend, this fitting is designed for installations requiring a smaller directional adjustment than a 45-degree or 90-degree elbow.
Manufactured by Tigre DuraPlastic, these elbows feature Gasket x Gasket (GxG) connections, with gasketed bells at both ends. Available in 4", 5", 6", 8", 10", and 12" nominal sizes, they connect compatible spigot-end SDR35 piping while changing the pipeline direction by 22.5 degrees.
Product Highlights
- SDR35 gasketed 22.5° elbow
- 1/16 bend fitting configuration
- 22.5-degree change in pipe direction
- Gasket x Gasket (GxG) connections
- Gasketed bell at both ends
- Available in 4", 5", 6", 8", 10", and 12" nominal sizes
- Designed for compatible SDR35 sewer and drainage piping
- Injection-molded construction for 4" through 8" sizes
- PVC material construction
- Virgin PVC compound with cell classification 12454 or 13343 for injection-molded fittings
- Injection-molded PVC compound certified to ASTM D1784
- Applicable ASTM D3034, ASTM F1336, and CSA B182.2 specifications
- Gaskets manufactured to ASTM F477 or ASTM F913
- Gasketed joints comply with ASTM D3212, where applicable
- Joint testing includes internal pressure and vacuum conditions
- Joint testing includes misalignment and 5% top-load deflection
- Firmly seated gaskets help prevent dislocation or misalignment
- Third-party NSF certification where applicable
- Manufacturer drawing dimensions available for 4", 5", 6", and 8" sizes
- Made in the USA
Available Sizes & Part Numbers
All six elbows feature Gasket x Gasket connections. Select the nominal size required for the intended SDR35 piping system.
| Nominal Size | Connections | Part Number | SKU | Unit Weight |
|---|---|---|---|---|
| 4" | Gasket x Gasket | 35-1604 | 100029357 | 1.042 lb |
| 5" | Gasket x Gasket | 35-1707 | 100030901 | 2.340 lb |
| 6" | Gasket x Gasket | 35-1605 | 100029356 | 2.856 lb |
| 8" | Gasket x Gasket | 35-90 | 100029351 | 3.864 lb |
| 10" | Gasket x Gasket | 35-99 | 300003467 | 8.860 lb |
| 12" | Gasket x Gasket | 35-108 | 300003525 | 15.860 lb |
Technical Specifications
| Brand | Tigre DuraPlastic |
|---|---|
| Product Type | SDR35 Gasketed 22.5° Elbow |
| Manufacturer Drawing Designation | 1/16 Bend GxG |
| Product Family | SDR35 Gasketed Fittings |
| Fitting Angle | 22.5° |
| Bend Configuration | 1/16 Bend |
| Connection Configuration | Gasket x Gasket (GxG) |
| Number of Connections | Two gasketed bells |
| Available Nominal Sizes | 4", 5", 6", 8", 10", and 12" |
| SDR Classification | SDR35 |
| Material | PVC |
| Construction | Injection molded for 4" through 8" sizes; confirm construction of 10" and 12" sizes with the manufacturer |
| PVC Cell Classification | 12454 or 13343 for injection-molded fittings |
| PVC Material Standard | ASTM D1784 for injection-molded PVC compound |
| Manufacturing Standards | ASTM D3034, ASTM F1336, and CSA B182.2, as applicable |
| Gasket Standards | ASTM F477 or ASTM F913 |
| Gasketed Joint Standard | ASTM D3212, where applicable |
| Gasketed Joint Testing | Internal pressure (exfiltration) and vacuum (infiltration), including joint misalignment and 5% top-load deflection |
| Gasket Retention | Gaskets firmly seated to help prevent dislocation or misalignment |
| Certification | Third-party NSF tested, certified, and listed to applicable ASTM D3034, ASTM F1336, and CSA B182.2 requirements, where applicable |
| Country of Manufacture | USA |
Manufacturer Technical Drawing Dimensions
The following measurements are taken from Tigre's 1/16 BEND GxG technical drawing. Dimensions A, B, and C correspond to the labeled measurement locations in the manufacturer's illustration. All dimensions are in inches.
| Part Number | Size | A | B | C |
|---|---|---|---|---|
| 35-1604 | 4" | 6.06" | 5.25" | 0.54" |
| 35-1707 | 5" | 4.06" | 5.68" | 0.75" |
| 35-1605 | 6" | 9.85" | 8.75" | 0.90" |
| 35-90 | 8" | 9.44" | 10.75" | 1.10" |
| 35-99 | 10" | Refer to manufacturer for dimensions | ||
| 35-108 | 12" | Refer to manufacturer for dimensions | ||
Refer to the Technical Drawings PDF for the illustrated measurement locations of dimensions A, B, and C. Dimensions for parts 35-99 and 35-108 are not provided in the referenced 1/16 Bend GxG drawing. Confirm all dimensions needed for installation clearance.
Product Details
22.5° Directional Change
Provides a smaller directional adjustment than a 45-degree or 90-degree elbow.
Gasket x Gasket Connections
Features gasketed bells at both ends for joining compatible spigot-end SDR35 piping.
Six Nominal Sizes
Available in 4", 5", 6", 8", 10", and 12" nominal sizes.
PVC Construction
Part of Tigre's SDR35 PVC fitting family. Injection-molded construction applies to the 4" through 8" sizes.
Gasketed Joint Requirements
Applicable gasketed joints comply with ASTM D3212 and Tigre's specified testing requirements.
Manufacturer Drawings
Part-specific drawing dimensions are provided for 4", 5", 6", and 8" sizes. Contact the manufacturer for 10" and 12" dimensions.
Product Resources & Support
Review Tigre's SDR35 gasketed fitting specifications, technical drawings, and product catalog. Contact GetPipe.com for help confirming 22.5-degree elbow sizes, gasketed connections, or manufacturer dimensions.
Frequently Asked Questions
What is an SDR35 gasketed 22.5° elbow?
It is a PVC sewer fitting designed to provide a 22.5-degree change in pipe direction.
What does GxG mean?
GxG stands for Gasket x Gasket. The fitting has a gasketed bell at both ends.
What sizes are available?
These elbows are available in 4", 5", 6", 8", 10", and 12" nominal sizes.
Is a 22.5° elbow the same as a 1/16 bend?
Yes. Tigre identifies these 22.5-degree elbows as 1/16 Bend GxG fittings.
Are both ends gasketed?
Yes. These elbows feature Gasket x Gasket connections, with a gasketed bell at each end.
How are these different from Gasket x Spigot 22.5° elbows?
Gasket x Gasket elbows have gasketed bells at both ends. Gasket x Spigot elbows have one gasketed bell and one spigot end.
Are these fittings injection molded?
Tigre specifies injection-molded construction for its 4" through 12" SDR35 fitting range. Confirm the exact construction of the 10" and 12" parts if required for your application.
What PVC material specifications apply?
For injection-molded fittings, Tigre specifies virgin PVC compound with cell classification 12454 or 13343, certified to ASTM D1784.
What standards apply to the gasketed joints?
Gaskets are manufactured to ASTM F477 or ASTM F913. Applicable gasketed joints comply with ASTM D3212.
Where can I find the manufacturer's dimensions?
Dimensions A, B, and C are provided above for 4", 5", 6", and 8" parts. Refer to Tigre's Technical Drawings PDF for the illustrated measurement locations. Contact the manufacturer for 10" and 12" dimensions.
Can these elbows be used with compressed air or gases?
No. Do not use these fittings with compressed air or gases. Do not test PVC piping systems with compressed air or gases.
Important Ordering & Safety Notes
Ordering: Confirm the required nominal size and 22.5-degree bend configuration before ordering.
Connection Configuration: These fittings are Gasket x Gasket (GxG), not Gasket x Spigot (GxS). Verify both mating connections before installation.
System Compatibility: Verify compatibility with the intended SDR35 PVC sewer or drainage piping system.
Installation: Follow Tigre's requirements for pipe preparation, gasket lubrication, joint insertion, alignment, and assembly.
Gasket Retention: Ensure gaskets remain firmly seated during assembly to prevent dislocation or misalignment.
Dimensions: Review the manufacturer's technical drawing for available dimensions. Confirm 10" and 12" dimensions directly with the manufacturer if required.
Compressed Air and Gases: Do not use these fittings for compressed air or gases. Do not test PVC piping systems with compressed air or gases.
Fluid Compatibility: Do not use these fittings with liquids not recommended by Tigre.
Warranty: Modification of fittings voids the manufacturer's warranty. Specifications are subject to change without notice.
