Spears
Schedule 80 PVC 90° Sweep Elbow (Socket x Socket)
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
Schedule 80 PVC 90° Sweep Elbow (Socket x Socket)
Schedule 80 PVC 90° Sweep Elbow (Socket x Socket) provides a sweeping 90-degree change in direction between compatible Schedule 80 PVC pipe sections. The socket connections at both ends receive appropriately sized compatible PVC pipe for integration into the piping layout.
The 90° sweep elbow configuration combines a gradual right-angle directional transition with socket connections on both ends. Selection should account for nominal size, Schedule 80 PVC compatibility, required direction change, adjoining PVC pipe, socket joining requirements, sweep orientation, piping alignment, support, and available installation clearance.
Product Highlights
- PVC construction
- Socket connections
- Schedule 80 design
- 90° sweep configuration
- Provides a sweeping right-angle transition
- Connects compatible PVC pipe sections
- Designed for compatible PVC solvent-cement joining
- Redirects Schedule 80 PVC piping through a sweeping 90° change in direction
Technical Specifications
| Product Type | Sweep Elbow |
|---|---|
| Material | PVC |
| Schedule | Schedule 80 |
| Connection | Socket x Socket |
| Connection Count | Two |
| Fitting Configuration | 90° Sweep Elbow |
| Connection Interface | Compatible PVC Pipe |
| Connection Style | Socket x Socket |
| Joining Method | Compatible PVC Solvent-Cement Joining |
| Direction Change | 90° |
| Piping Configuration | Sweeping Right-Angle Transition |
| Primary Function | Provide a Sweeping 90° Transition in Compatible Schedule 80 PVC Piping |
90° Sweep Elbow Design
The 90° sweep configuration redirects compatible PVC piping through a sweeping right-angle transition rather than a compact elbow profile. Socket connections on both ends allow compatible PVC pipe sections to connect directly to the elbow.
The intended sweep orientation should be established before permanent joining so the adjoining pipe follows the required routing. Planning the fitting position in advance also helps coordinate pipe lengths, nearby fittings, piping supports, and the installation space required for the sweep.
Socket Connections
The socket connections receive appropriately sized compatible PVC pipe at both ends of the sweep elbow. This socket x socket arrangement provides a consistent connection style while the fitting establishes the required 90-degree directional transition.
The mating surfaces should be prepared using the appropriate PVC solvent-cement joining procedure for the installation. Compatible joining materials, proper insertion, correct alignment, and planned sweep orientation help establish the connections without placing unnecessary stress on the fitting or adjoining piping.
Schedule 80 PVC Integration
The Schedule 80 PVC construction allows the sweep elbow to integrate into compatible Schedule 80 PVC piping arrangements requiring a 90-degree directional transition. Matching the nominal size and socket connections to the adjoining PVC pipe helps maintain the intended piping configuration.
Application suitability should be evaluated using the requirements of the complete piping system rather than the schedule designation alone. Intended service conditions, adjoining materials, connection compatibility, joining materials, installation environment, piping support, and applicable practices should all be considered during fitting selection.
Sweeping Right-Angle Transition
A Schedule 80 PVC 90° Sweep Elbow provides a sweeping directional transition where compatible PVC piping must turn through 90 degrees. The socket x socket configuration allows pipe to connect at both ends while the sweep establishes the required right-angle routing change.
Installation planning should consider the sweep profile, socket insertion, adjoining pipe alignment, nearby fittings, available clearance, and piping support. Connected pipe should align naturally with the elbow so the fitting is not relied upon to correct offsets or support improperly positioned piping.
Installation & Selection Considerations
- Confirm the nominal size.
- Verify the required 90° sweep.
- Check Schedule 80 PVC compatibility.
- Confirm both required socket connections.
- Allow adequate clearance for the sweep configuration.
Our PVC fitting specialists can help review your nominal size, Schedule 80 requirements, socket x socket configuration, required 90° sweep, adjoining PVC pipe, joining requirements, sweep orientation, piping layout, support requirements, and available installation clearance before you order.
Frequently Asked Questions
What is a Schedule 80 PVC 90° Sweep Elbow used for?
It provides a sweeping 90-degree change in direction between compatible Schedule 80 PVC pipe sections.
What does socket x socket mean?
Socket x socket means both ends of the elbow have socket-style connections designed to receive appropriately sized compatible PVC pipe.
How much does this sweep elbow change the piping direction?
The sweep elbow redirects the compatible piping arrangement through a 90-degree change in direction.
What connects to the socket openings?
Both socket openings receive appropriately sized compatible PVC pipe for the applicable solvent-cement joining procedure.
How is a sweep elbow different from a compact 90° elbow?
A sweep elbow provides the 90-degree directional change through a more gradual sweeping configuration rather than a compact elbow profile.
How are the socket connections assembled?
Compatible PVC pipe is joined using the appropriate PVC solvent-cement preparation and assembly procedure for the installation.
Important Ordering & Installation Notes
- Inspect both sockets before use.
- Confirm the nominal connection size.
- Prepare each pipe end correctly.
- Set the sweep orientation before cementing.
- Use compatible PVC joining materials throughout.
