Goss
Goss Torch Replacement Tip Ends for Extensions
- Availability:
- Allow 2-3 Days to Ship
- Weight:
- 0.00 LBS
Description
Goss Torch Replacement Tip Ends for Extensions
Goss Torch Replacement Tip Ends for Extensions are designed for use with compatible brass extensions and torch handles to provide controlled flame performance for welding, brazing, soldering, and general heating applications. Available in pencil- and brush-flame configurations, these replacement tip ends allow the torch setup to be matched to the required heat pattern and coverage.
The BP-2TE Pencil Flame Tip End produces a concentrated flame for fine detail work, while the BP-5TE Brush Flame Tip End provides a broader heating pattern for applications requiring greater flame coverage. Both are designed for compatible propane, air, and MAPP-style torch systems.
Product Highlights
- Replacement torch tip ends for compatible Goss brass extensions
- Designed for welding, brazing, soldering, and general heating work
- Available in pencil-flame and brush-flame configurations
- BP-2TE provides a concentrated flame for detail work
- BP-5TE provides a broader flame for wider heating coverage
- Designed for compatible propane, air, and MAPP-style torch systems
- Industrial replacement components for compatible Goss torch assemblies
- Allows flame pattern and heat output to be matched to the application
Available Tip Ends
| BP-2TE | Pencil Flame Tip End – approximately 1" flame diameter and approximately 11,000 BTU at 40 PSI |
|---|---|
| BP-5TE | Brush Flame Tip End – approximately 1-3/8" flame diameter and approximately 57,000 BTU at 40 PSI |
Technical Specifications
| Manufacturer | Goss |
|---|---|
| Product Type | Replacement Torch Tip Ends |
| Application | Compatible Brass Extensions and Torch Handles |
| Available Models | BP-2TE and BP-5TE |
| Fuel Compatibility | Propane / Air / MAPP-Style Torch Systems |
| Primary Applications | Welding, Brazing, Soldering and General Heating |
Choose the Right Replacement Tip End
BP-2TE – Pencil Flame Tip End
- Replacement tip end for compatible Goss torch assemblies
- Pencil-style flame
- Designed for precise, concentrated heating
- Approximate flame diameter: 1"
- Approximate heat output: 11,000 BTU at 40 PSI
- Well suited for detail soldering, brazing, and localized heating
BP-5TE – Brush Flame Tip End
- Replacement tip end for compatible Goss torch assemblies
- Brush-style flame
- Designed for broader heating coverage
- Approximate flame diameter: 1-3/8"
- Approximate heat output: 57,000 BTU at 40 PSI
- Well suited for larger heating, brazing, and soldering applications
Flame Performance
Concentrated Pencil Flame
The BP-2TE produces a narrow pencil-style flame designed for applications where more focused heat placement is preferred. This makes it useful for detail work and smaller heating zones.
Broader Brush Flame
The BP-5TE produces a wider brush-style flame designed to spread heat over a larger area. Its greater heat output makes it better suited for applications requiring broader coverage.
BP-2TE Pencil Flame Tip End
The BP-2TE is designed to provide a concentrated pencil flame with an approximate diameter of 1 inch. At 40 PSI, the tip end delivers approximately 11,000 BTU, making it suitable for precise soldering, brazing, and localized heating work.
BP-5TE Brush Flame Tip End
The BP-5TE produces a broader brush flame with an approximate diameter of 1-3/8 inches. At 40 PSI, the tip end delivers approximately 57,000 BTU, providing substantially greater heat output for wider heating applications.
Common Applications
Precision Work
- Detailed soldering
- Light brazing
- Localized heating
- Small-area metalwork
- Maintenance and repair tasks
Broader Heating
- General brazing
- Broader soldering applications
- Surface heating
- Fabrication work
- General torch heating applications
Extension & Torch Compatibility
These replacement tip ends are designed for use with compatible Goss brass extensions and torch handles. Confirm the extension, handle, fuel setup, and specific tip-end compatibility before ordering or installing replacement components.
Tip Selection Considerations
Select the BP-2TE when a smaller, concentrated pencil flame is needed for detail work. Choose the BP-5TE when the application requires greater heat output and a broader brush flame. The correct selection should be based on the torch assembly, fuel setup, required flame pattern, and heating application.
Goss Torch Equipment Catalog
Refer to the Goss Torch Equipment Catalog for additional information on compatible brass extensions, torch handles, replacement components, and related Goss torch equipment.
California Proposition 65 Warning
WARNING: This product may expose you to chemicals, including brass and lead compounds, which are known to the State of California to cause cancer and reproductive harm. Wash hands after handling.
Need Help Selecting a Replacement Tip End?
Our industrial specialists can help review your Goss torch handle, brass extension, required flame pattern, heat output, and application before you order.
Frequently Asked Questions
What are Goss BP-2TE and BP-5TE tip ends used for?
They are replacement torch tip ends designed for compatible brass extensions and torch handles used for soldering, brazing, welding, and general heating applications.
What is the difference between the BP-2TE and BP-5TE?
The BP-2TE produces a smaller pencil flame for precise heating, while the BP-5TE produces a broader brush flame with substantially greater heat output.
What flame diameter does the BP-2TE produce?
The BP-2TE produces an approximate flame diameter of 1 inch.
How much heat does the BP-2TE produce?
The BP-2TE produces approximately 11,000 BTU at 40 PSI.
What flame diameter does the BP-5TE produce?
The BP-5TE produces an approximate flame diameter of 1-3/8 inches.
How much heat does the BP-5TE produce?
The BP-5TE produces approximately 57,000 BTU at 40 PSI.
Which tip end is better for detail work?
The BP-2TE is generally better suited for detail work because its pencil flame provides a smaller, more concentrated heating area.
Which tip end is better for broader heating?
The BP-5TE is better suited for broader heating because its brush flame covers a wider area and provides higher heat output.
Do these tip ends work with any torch handle?
No. They are intended for compatible Goss brass extensions and torch assemblies. Confirm the exact extension and handle compatibility before ordering.
Important Ordering Notes
- Available replacement tip ends: BP-2TE and BP-5TE.
- Designed for compatible Goss brass extensions and torch handles.
- BP-2TE uses a pencil-style flame.
- BP-2TE flame diameter is approximately 1".
- BP-2TE heat output is approximately 11,000 BTU at 40 PSI.
- BP-5TE uses a brush-style flame.
- BP-5TE flame diameter is approximately 1-3/8".
- BP-5TE heat output is approximately 57,000 BTU at 40 PSI.
- Designed for compatible propane, air, and MAPP-style torch systems.
- Confirm brass-extension, torch-handle, fuel, and tip-end compatibility before ordering.
- Follow applicable torch-equipment safety procedures and manufacturer instructions during use.
- Refer to the Goss Torch Equipment Catalog for additional compatibility information.
