ASC
COOPLET® Schedule 40 Grooved x Bevel Adapter Nipple
- SKU:
- 61GB4
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
COOPLET® Schedule 40 Grooved x Bevel Adapter Nipple
ASC / SCI FIG 61GB4 COOPLET® Schedule 40 Grooved x Bevel Adapter Nipples provide a compact transition between a grooved piping connection and a beveled weld-end connection.
Manufactured from Schedule 40 steel pipe, the adapter features a cut-grooved end for use with compatible grooved couplings and a 37-1/2° beveled end for field welding into compatible steel piping systems.
Product Highlights
- ASC / SCI COOPLET®
- FIG 61GB4
- Schedule 40 construction
- Grooved x bevel connection
- Cut-grooved pipe end
- 37-1/2° beveled weld end
Technical Specifications
| Product Type | Grooved x Bevel Adapter Nipple |
|---|---|
| Brand | ASC / SCI |
| Product Family | COOPLET® |
| Figure | 61GB4 |
| Schedule | Schedule 40 |
| Connection | Grooved x Beveled Weld End |
| Groove Type | Cut Groove |
| Bevel | 37-1/2° |
| Adapter Nipple Standard | ASTM A106 |
| Pipe Standard | ASME B36.10 |
| Groove Standard | AWWA C606 |
Construction Details
FIG 61GB4 is manufactured from Schedule 40 steel pipe and combines two connection methods in a single straight adapter nipple.
One end incorporates a cut groove for connection with a compatible grooved coupling. The opposite end is prepared with a 37-1/2° bevel for a welded piping connection.
The COOPLET® adapter nipple family conforms to applicable requirements including ASTM A106, ASME B36.10, and AWWA C606.
Connection Design & Typical Applications
Adapter Design
- Cut-grooved connection
- 37-1/2° beveled end
- Schedule 40 pipe wall
- Straight adapter design
- Groove-to-weld transition
Typical Applications
- Grooved piping systems
- Mechanical piping
- Industrial piping
- Fire protection piping
- Groove-to-weld transitions
Installation & Selection Considerations
- Confirm the required pipe size.
- Verify the required nipple length.
- Match the grooved coupling system.
- Use proper welding procedures.
- Confirm system service requirements.
Use the supplied SCI COOPLET® document to review FIG 61GB4 item numbers, Schedule 40 construction, cut-groove information, beveled-end details, and other product information before selecting your adapter nipple.
Need Help Selecting a COOPLET® Grooved x Bevel Adapter Nipple?
Need help confirming pipe size, nipple length, Schedule 40 requirements, cut-groove compatibility, or the beveled weld-end connection? The GetPipe.com Team can help.
Frequently Asked Questions
What is the figure number for this COOPLET® adapter nipple?
The Schedule 40 Grooved x Bevel Adapter Nipple is ASC / SCI FIG 61GB4.
What connections does FIG 61GB4 provide?
It provides a cut-grooved connection on one end and a beveled weld-end connection on the opposite end.
What schedule is the adapter nipple?
FIG 61GB4 uses Schedule 40 pipe construction.
Is the grooved end cut grooved or roll grooved?
ASC specifies that the grooved end is cut grooved.
What is the bevel angle?
The supplied SCI COOPLET® documentation identifies the beveled end as 37-1/2°.
What standards apply to this adapter nipple?
The COOPLET® adapter nipple family references ASTM A106, ASME B36.10, and AWWA C606.
Where is a grooved x bevel adapter nipple used?
It is useful where a compatible grooved piping system must transition to a field-welded steel piping connection.
What should I confirm before ordering?
Confirm pipe size, nipple length, Schedule 40 requirements, grooved coupling compatibility, and the required welded connection.
Important Ordering & Installation Notes
- Confirm the required pipe size.
- Verify the required nipple length.
- Check cut-groove compatibility.
- Follow proper welding procedures.
- Confirm intended system service.
