Charman Inc.
Charman 3/8" OD Uncoated Connector - 1/2" MIP x 1/2" MIP
- Availability:
- Usually in Stock – Ships Quickly
- Weight:
- 0.00 LBS
Description
Charman 3/8" OD Uncoated Connector - 1/2" MIP x 1/2" MIP
Charman 3/8" OD Uncoated Connectors with 1/2" MIP x 1/2" MIP connections provide a flexible connection between compatible threaded piping and equipment connections. The uncoated flexible stainless steel connector is available in eight lengths to accommodate different connection distances and installation layouts.
Available from 12" through 72", every C1 variant uses the same 3/8" OD connector with matching 1/2" MIP connections on both ends. Select a length that provides proper routing without excessive stretching, twisting, kinking, or unnecessary strain on the connector.
Product Highlights
- 3/8" outside diameter
- Uncoated connector design
- Eight connector lengths available
- 1/2" MIP x 1/2" MIP connections
- Male x male threaded configuration
- Flexible stainless steel connector construction
- Available in lengths ranging from 12" through 72"
- Multiple length options simplify selection for different connection distances
What Is a 3/8" OD Uncoated Connector?
A 3/8" OD uncoated connector provides a flexible connection between compatible piping and equipment. Its flexible construction helps accommodate connection spacing and alignment while reducing the need for a completely rigid piping arrangement.
This C1 configuration uses a 1/2" MIP connection on both ends. The male x male threaded arrangement provides a flexible connection between compatible female-threaded components while maintaining the same nominal connection size at each end.
Why Choose a Charman 3/8" OD Uncoated Connector?
MIP x MIP Configuration
- Male threaded ends
- Matching 1/2" connections
- Same nominal size at both ends
- Same configuration across all lengths
- Connects compatible female-threaded components
Multiple Length Options
- Eight lengths
- 12" through 72"
- Flexible routing options
- Useful for different equipment locations
- Allows connector length to match the installation layout
Common Applications
Equipment Connections
- Equipment hookups
- Replacement connections
- Flexible piping transitions
- Connection-point alignment
- Compatible equipment installations
Installation & Maintenance
- Service connections
- Equipment replacement
- Piping modifications
- Connection updates
- Flexible routing between threaded connection points
Construction Details
Uncoated Flexible Connector
- 3/8" OD design
- Flexible connector body
- Uncoated exterior configuration
- Available in multiple overall lengths
- Designed for compatible flexible connection applications
1/2" MIP x 1/2" MIP Connections
- Two threaded ends
- 1/2" MIP connections
- Matching nominal sizes
- Male x male connection arrangement
- Connection configuration remains consistent across all lengths
Available Connector Lengths
The Charman 3/8" OD Uncoated Connector - 1/2" MIP x 1/2" MIP is available in 12", 18", 24", 30", 36", 48", 60", and 72" lengths.
All eight variants maintain the same 3/8" OD and 1/2" MIP x 1/2" MIP connection configuration. Only the overall connector length changes between variants.
Selecting the Correct Connector Length
Shorter Lengths
- 12"
- 18"
- 24"
- Compact routing
- Useful for nearby connection points
Longer Lengths
- 30" through 72"
- Additional routing length
- Greater connection distance
- More flexibility for equipment positioning
- Useful where connection points are farther apart
Where This Charman Connector Makes Sense
- For flexible equipment connections
- When matching male threads are required
- For replacement or new installation work
- Where 1/2" MIP x 1/2" MIP connections are needed
- Where flexible routing is preferred between connection points
- When a 3/8" OD uncoated connector matches the required piping arrangement
Installation & Selection Considerations
- Select the appropriate connector length.
- Confirm both 1/2" MIP connection sizes.
- Verify the male threaded connection arrangement before ordering.
- Route the connector without excessive bending, twisting, stretching, or kinking.
- Confirm equipment compatibility, service requirements, connection sizes, and installation conditions before use.
Product Selection Considerations
Connection Type
Every C1 variant uses a 1/2" MIP x 1/2" MIP connection configuration. Confirm that both mating components use compatible female threads before selecting the connector.
Connector Length
Choose from 12", 18", 24", 30", 36", 48", 60", or 72". Select a length that reaches the required connection points while allowing the connector to route naturally without unnecessary strain.
Review the Charman connector specification sheet for sizing and installation information, or use the uncoated connector catalog to compare connector configurations and available lengths.
Need Help Selecting a Connector?
The GetPipe.com team can help confirm your connector diameter, length, threaded connection sizes, equipment requirements, and installation conditions before you order.
Frequently Asked Questions
What outside diameter is this connector?
This connector family has a 3/8" outside diameter.
What connections does this connector use?
Every variant uses 1/2" MIP connections on both ends.
What lengths are available?
Available lengths are 12", 18", 24", 30", 36", 48", 60", and 72".
How many variants are available?
Eight variants are available, with one variant for each connector length.
Is this connector coated?
No. This connector uses an uncoated flexible stainless steel design.
Does the connection configuration change by length?
No. Every available length uses the same 1/2" MIP x 1/2" MIP connection configuration.
How do I choose the correct connector length?
Choose a length that reaches both connection points while allowing the connector to route naturally without excessive stretching, twisting, or tight bends.
What should I confirm before ordering?
Confirm the 3/8" outside diameter, 1/2" MIP x 1/2" MIP connections, connector length, equipment requirements, and installation conditions.
Important Ordering & Installation Notes
- Eight connector lengths are available.
- All variants use 1/2" MIP x 1/2" MIP connections.
- Confirm both mating components use compatible female threads.
- Select a connector length that allows proper routing without stretching or kinking.
- Verify service requirements, equipment compatibility, connection sizes, and installation conditions before use.
