Description
Goss BP Series Air-Propane Screw-In Tips
Goss BP Series Air-Propane Screw-In Tips are replacement flame tips designed for compatible air-propane and MAPP-style torch systems. Built for use with the Goss AP-1 screw-in torch handle, these tips provide quiet, adjustable flame performance for light-duty soldering, heating, and related torch applications.
The BP Series uses a direct screw-in connection and is available in different flame configurations to suit the application. The BP-2 Pencil Tip provides a smaller, more concentrated flame, while the BP-5 Brush Tip produces a broader flame pattern with substantially higher heat output.
Product Highlights
- Replacement air-propane / MAPP-style torch tips
- BP Series screw-in design
- Threads directly into the compatible Goss AP-1 torch handle
- Quiet, adjustable flame performance
- Suitable for soldering and light heating applications
- Available in pencil-tip and brush-tip configurations
- BP-2 produces a more concentrated pencil flame
- BP-5 produces a broader brush flame with higher heat output
- Designed as replacement accessories for compatible Goss torch systems
Available Tip Models
| BP-2 | Pencil Tip – approximately 1" to 1-1/2" flame diameter; approximately 11,000 BTU/hr at 40 PSI |
|---|---|
| BP-5 | Brush Tip – approximately 1-3/8" to 4" flame diameter; approximately 57,000 BTU/hr at 40 PSI |
Technical Specifications
| Manufacturer | Goss |
|---|---|
| Series | BP Series |
| Product Type | Air-Propane Screw-In Torch Tips |
| Tip Style | Screw-In |
| Compatible Handle | Goss AP-1 |
| Compatible Fuel Systems | Air-Propane / MAPP-Style Torch Systems |
| Flame Characteristics | Quiet and Adjustable |
| Primary Applications | Light-Duty Soldering and Heating |
Choose the Right BP Series Tip
BP-2 Pencil Tip
- Concentrated pencil-style flame
- Approximate flame diameter: 1" to 1-1/2"
- Approximate heat output: 11,000 BTU/hr at 40 PSI
- Well suited for smaller soldering and localized heating tasks
- Compatible with the Goss AP-1 screw-in torch handle
BP-5 Brush Tip
- Broader brush-style flame
- Approximate flame diameter: 1-3/8" to 4"
- Approximate heat output: 57,000 BTU/hr at 40 PSI
- Provides greater coverage and substantially higher heat output than the BP-2
- Compatible with the Goss AP-1 screw-in torch handle
Flame Characteristics
Quiet Operation
The BP Series is designed to provide a quiet flame during normal operation, making the tips suitable for controlled soldering and heating work where steady heat delivery is important.
Adjustable Flame
When installed on a compatible Goss AP-1 handle, flame output can be adjusted through the handle's front-mounted control valve to match the requirements of the application.
BP-2 Pencil Flame
The BP-2 Pencil Tip produces a relatively narrow flame with an approximate diameter ranging from 1" to 1-1/2". At 40 PSI, its published heat output is approximately 11,000 BTU/hr, making it useful for smaller soldering jobs and localized heating applications.
BP-5 Brush Flame
The BP-5 Brush Tip produces a wider flame pattern with an approximate diameter ranging from 1-3/8" to 4". At 40 PSI, its published heat output is approximately 57,000 BTU/hr, making it better suited for applications requiring broader heat coverage and greater output.
Compatible with the Goss AP-1 Handle
BP Series tips are designed to screw directly into the Goss AP-1 torch handle. The AP-1 features a front-mounted valve for flame control and is intended for compatible air-propane and MAPP-style torch applications.
Common Applications
Soldering
- Light-duty soldering
- Plumbing and mechanical service
- Localized tube and fitting heating
- Maintenance and repair work
General Heating
- Light heating applications
- Controlled surface heating
- Maintenance work
- Applications requiring pencil or brush flame patterns
Tip Selection Considerations
Select the BP Series tip according to the heat output and flame coverage required for the job. The BP-2 is better suited to more concentrated work, while the BP-5 provides a broader flame and significantly higher heat output. Confirm torch-handle compatibility and application requirements before ordering.
Goss Torch Equipment Catalog
Refer to the Goss Torch Equipment Catalog for additional BP Series information, compatible torch handles, related tips, accessories, and Goss torch equipment.
California Proposition 65 Warning
WARNING: This product may expose you to chemicals, including brass and lead compounds, which are known to the State of California to cause cancer and reproductive harm. Wash hands after handling.
Need Help Selecting a Torch Tip?
Our industrial specialists can help compare BP Series flame patterns, heat output, torch-handle compatibility, and your soldering or heating application before you order.
Frequently Asked Questions
What are Goss BP Series tips used for?
They are screw-in air-propane / MAPP-style torch tips intended for light-duty soldering, heating, and related torch applications.
What torch handle fits BP Series tips?
The BP Series tips are designed for use with the Goss AP-1 screw-in torch handle.
What is the difference between the BP-2 and BP-5?
The BP-2 is a pencil-style tip with a smaller flame and approximately 11,000 BTU/hr output at 40 PSI. The BP-5 is a brush-style tip with a broader flame and approximately 57,000 BTU/hr output at 40 PSI.
What flame size does the BP-2 produce?
The BP-2 produces an approximate flame diameter of 1" to 1-1/2".
What flame size does the BP-5 produce?
The BP-5 produces an approximate flame diameter of 1-3/8" to 4".
How much heat does the BP-2 produce?
The BP-2 is rated at approximately 11,000 BTU/hr at 40 PSI.
How much heat does the BP-5 produce?
The BP-5 is rated at approximately 57,000 BTU/hr at 40 PSI.
Are BP Series tips adjustable?
Yes. When used with the compatible Goss AP-1 handle, flame output can be adjusted using the handle's front-mounted control valve.
Should I choose the BP-2 or BP-5?
Choose the BP-2 when a smaller, concentrated pencil flame is preferred. Choose the BP-5 when a broader flame and higher heat output are required.
Important Ordering Notes
- Product family: Goss BP Series.
- Tips use a screw-in connection.
- Designed for use with the Goss AP-1 torch handle.
- Intended for compatible air-propane / MAPP-style torch systems.
- BP-2 is a pencil-style tip.
- BP-2 flame diameter is approximately 1" to 1-1/2".
- BP-2 heat output is approximately 11,000 BTU/hr at 40 PSI.
- BP-5 is a brush-style tip.
- BP-5 flame diameter is approximately 1-3/8" to 4".
- BP-5 heat output is approximately 57,000 BTU/hr at 40 PSI.
- Confirm the required flame pattern, heat output, and AP-1 handle compatibility before ordering.
- Follow applicable torch-equipment safety procedures and manufacturer instructions during operation.
- Refer to the Goss Torch Equipment Catalog for additional product and compatibility information.
