Merit Brass
150# Stainless Steel Hex Head Plug ISO 49
- SKU:
- K417H-K617H
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
150# Stainless Steel Hex Head Plug ISO 49
150# Stainless Steel Hex Head Plugs are standard-pattern cast fittings designed to close compatible female-threaded openings in stainless steel piping systems. The external hex head provides multiple wrenching flats for secure installation and removal, while the stainless steel construction offers dependable corrosion resistance for commercial, industrial, and process applications.
The fitting family conforms to AISI 304 or 316 stainless steel material requirements and ISO 49-1983 (E) dimensional requirements. These fittings are also listed as low lead certified to NSF/ANSI 61.
Product Highlights
- 150# stainless steel hex head plug
- Standard-pattern cast fitting design
- Designed to close compatible female-threaded openings
- External hex head provides multiple wrenching flats
- Available in AISI 304 or 316 stainless steel material
- Low lead certified to NSF/ANSI 61
- Dimensions conform to ISO 49-1983 (E)
- Corrosion-resistant stainless steel construction
- Designed for straightforward installation and removal
- Helps prevent contamination from rust, scale, and small particles
- Resists corrosive attack from many industrial and chemical solutions and mixtures
- Provides strength at elevated temperatures
- Long service-life potential in compatible applications
Technical Specifications
| Product Type | Hex Head Plug |
|---|---|
| Pressure Class | 150# |
| Material | Stainless Steel |
| Material Grades | AISI 304 or 316 |
| Dimensional Standard | ISO 49-1983 (E) |
| Head Style | Hex Head |
| Construction Style | Standard Pattern Cast Fitting |
| Primary Function | Threaded Opening Closure |
| Certification | Low Lead Certified NSF/ANSI 61 |
Hex Head Plug Design
A hex head plug is used to close a compatible female-threaded fitting, valve, port, or piping opening.
The external hex head provides six wrenching flats, giving the installer multiple tool-engagement positions for tightening or removal.
Plug vs. Cap
Hex Head Plug
- Threads into a female-threaded opening
- Uses an external male-threaded connection
- Hex head provides multiple wrenching surfaces
- Useful for closing ports, fittings, and equipment openings
Cap
- Fits over a male-threaded pipe or fitting
- Uses an internal female-threaded connection
- Typically closes the end of a pipe run
- Different connection configuration from a plug
Hex Head vs. Square Head Plug
Hex Head Plug
- Six-sided external head
- Multiple wrench engagement positions
- Designed for threaded opening closure
- Useful with conventional wrench access
Square Head Plug
- Four-sided external head
- Provides square wrenching surfaces
- Also designed for threaded opening closure
- Different head geometry from the hex style
Stainless Steel Construction
The stainless steel construction provides corrosion resistance while helping prevent contamination associated with rust, scale, and small particles that can occur with some other metallic piping materials.
The supplied product information states that the material resists corrosive attack from hundreds of industrial and chemical solutions and mixtures and provides greater strength at elevated temperatures.
NSF/ANSI 61 Low Lead Certification
This fitting is listed as low lead certified to NSF/ANSI 61, supporting use in compatible potable-water applications where applicable code and system requirements are met.
Always confirm complete system requirements, local codes, operating conditions, and media compatibility before installation.
ISO 49 Standard Pattern
Dimensions conform to ISO 49-1983 (E), providing dimensional consistency for compatible standard-pattern cast stainless steel fittings.
Use the manufacturer dimensional document below to confirm hex head plug dimensions before ordering or installation.
Common Applications
Commercial & General Piping
- Closing unused threaded ports
- Water piping systems
- Commercial plumbing
- Valve and equipment openings
- Threaded stainless steel piping assemblies
Industrial & Corrosive Service
- Industrial process piping
- Chemical handling systems
- Corrosion-resistant piping applications
- Elevated-temperature service where compatible
- Applications where rust and scale contamination are undesirable
Need Help With Fitting Selection?
Confirm the nominal thread size, 150# pressure class, required stainless steel grade, mating female-threaded connection, operating temperature, media compatibility, and applicable system requirements before ordering.
Use the product documents below to review standard-pattern cast fitting dimensions and common pipe diameter and wall thickness information.
Product Documents
Merit Stainless Steel Standard Pattern Cast Fittings
Use this manufacturer reference for dimensional and product information covering Merit standard-pattern cast stainless steel fittings.
- Standard-pattern cast fitting information
- Useful for confirming hex head plug dimensions
- Supports ISO 49 fitting selection
- Recommended for dimensional review before ordering
Pipe Chart: Common Diameters & Wall Thicknesses
Use this pipe chart to confirm common nominal pipe sizes, outside diameters, and wall thicknesses when working with compatible piping components.
- Common pipe outside diameters
- Reference wall thickness information
- Useful for confirming piping system dimensions
- Recommended before ordering or installation
Frequently Asked Questions
What is a hex head plug used for?
A hex head plug is used to close a compatible female-threaded opening in a piping system, fitting, valve, or equipment connection.
What pressure class is this plug?
This fitting is listed as a 150# stainless steel plug.
Why does the plug have a hex head?
The hex head provides six wrenching flats for tightening and removing the plug.
What stainless steel grades are used?
The supplied product information states that the fitting family conforms to AISI 304 or 316 stainless steel material requirements.
What dimensional standard applies?
The fitting dimensions conform to ISO 49-1983 (E).
Is this fitting low lead certified?
Yes. The supplied product information lists the fitting as low lead certified to NSF/ANSI 61.
How is a hex head plug different from a square head plug?
A hex head plug has six wrenching flats, while a square head plug has four. Both are used to close compatible female-threaded openings.
How is a plug different from a cap?
A plug uses a male-threaded connection to close a female-threaded opening, while a cap uses a female-threaded connection to fit over a male-threaded pipe or fitting.
Why use stainless steel for this fitting?
Stainless steel provides corrosion resistance and helps avoid contamination associated with rust and scale in compatible applications.
Where can I find fitting dimensions?
Use the Merit Stainless Steel Standard Pattern Cast Fittings PDF in the Product Documents section above.
How can I confirm common pipe dimensions?
Use the Pipe Chart: Common Diameters & Wall Thicknesses PDF in the Product Documents section above.
Important Ordering Notes
- Product type: 150# Stainless Steel Hex Head Plug.
- Designed to close compatible female-threaded openings.
- Hex head provides multiple wrenching surfaces for installation and removal.
- Low lead certified to NSF/ANSI 61.
- Material conforms to AISI 304 or 316 requirements.
- Dimensions conform to ISO 49-1983 (E).
- Stainless steel construction provides corrosion resistance.
- Confirm nominal thread size, material grade, system pressure, operating temperature, and media compatibility before ordering.
- Verify applicable potable-water and local-code requirements when used in drinking-water systems.
- Refer to both Product Documents for fitting and pipe dimensional information.
