Merit Brass
125# Lead Free Brass Cross
- SKU:
- XNL110
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
125# Lead Free Brass Cross
125# Lead Free Brass Crosses are threaded fittings designed to create a four-way connection in compatible plumbing and piping systems. The cross configuration provides two opposing straight-through connections and two perpendicular branch connections, making it useful where multiple piping runs need to intersect at one fitting.
These fittings conform with the lead-content requirements for lead-free plumbing as defined by the U.S. Safe Drinking Water Act and are certified to contain ≤0.25 weighted average % lead. Manufacturer dimensional, certification, and material safety documentation is provided below.
Product Highlights
- 125# lead free brass cross
- Creates a four-way threaded piping connection
- Two straight-through connections with two 90° branch connections
- Designed for compatible threaded plumbing and piping systems
- Lead free brass construction
- Conforms with lead-content requirements for lead-free plumbing under the U.S. Safe Drinking Water Act
- Certified ≤0.25 weighted average % lead
- Useful where multiple piping runs intersect
- Provides a compact multi-directional fitting configuration
- Manufacturer dimensional and certification documentation available
Cross Fitting Construction
A cross fitting creates a four-way piping junction with two opposing straight-through connections and two additional connections positioned at 90 degrees to the main run.
This configuration allows multiple piping lines to intersect at a single fitting and can be used to divide, combine, or redirect flow depending on the piping system design.
Lead free brass construction makes this fitting suitable for applications requiring compliance with applicable lead-content requirements for plumbing products.
Technical Specifications
| Product Type | Cross |
|---|---|
| Pressure Class | 125# |
| Material | Lead Free Brass |
| Connection Type | Threaded |
| Configuration | Four-Way Cross |
| Branch Angles | 90° |
| Lead Content | ≤0.25 Weighted Average % Lead |
| Compliance | Conforms with Lead Content Requirements for Lead Free Plumbing as Defined by the U.S. Safe Drinking Water Act |
| Primary Function | Creating a Four-Way Piping Junction |
Why Choose a Lead Free Brass Cross?
Four-Way Connection
- Provides four threaded connection points
- Creates two perpendicular piping paths
- Useful where multiple lines intersect
- Can divide or combine flow through several connections
- Reduces the need for multiple tees in some layouts
Lead Free Brass Construction
- Certified ≤0.25 weighted average % lead
- Conforms with U.S. Safe Drinking Water Act lead-content requirements
- Provides corrosion resistance in compatible applications
- Suitable for applicable potable-water plumbing systems
- Manufacturer certification documentation available
Lead Free Compliance
The supplied product information states that these fittings conform with lead-content requirements for lead-free plumbing as defined by the U.S. Safe Drinking Water Act.
The fittings are also identified as being certified to contain ≤0.25 weighted average % lead. Review the manufacturer certification letter in the Product Documents section for additional certification information.
Cross vs. Tee
Cross
- Provides four threaded connections
- Creates two intersecting piping paths
- Includes two opposing branch directions
- Useful where several lines meet at one point
- Can simplify certain multi-branch layouts
Tee
- Provides three threaded connections
- Creates one 90-degree branch from a main run
- Used for simpler branch piping layouts
- Does not provide the fourth connection of a cross
- Common for single branch takeoffs
Common Applications
Plumbing & Water Systems
- Potable-water piping where applicable
- Commercial plumbing systems
- Water distribution piping
- Multi-branch plumbing layouts
- General threaded brass piping assemblies
Commercial & General Service
- Mechanical piping installations
- Utility piping systems
- Equipment distribution piping
- Multi-directional piping junctions
- Applications where several threaded lines intersect
Installation & Selection Guidance
- Confirm the required nominal fitting size before ordering.
- Verify thread compatibility with all four mating piping components.
- Confirm the required piping orientation before installation.
- Use an appropriate thread sealant suitable for the piping material, system media, pressure, and temperature.
- Apply thread sealant according to the sealant manufacturer's instructions.
- Avoid over-tightening threaded brass fittings.
- Confirm that the 125# fitting class is suitable for the intended piping system.
- Verify media, pressure, and temperature compatibility before installation.
- Confirm lead-free requirements for the specific plumbing application.
- Inspect all completed threaded connections for leaks before placing the system into service.
- Installation should comply with applicable plumbing codes and project requirements.
Important Ordering Notes
- Product is a 125# lead free brass cross.
- Designed to create a four-way threaded piping junction.
- Provides four threaded connection points.
- Conforms with lead-content requirements for lead-free plumbing as defined by the U.S. Safe Drinking Water Act.
- Certified ≤0.25 weighted average % lead.
- Confirm nominal fitting size before ordering.
- Verify thread compatibility with all four mating piping components.
- Confirm the required piping orientation before installation.
- Confirm pressure, temperature, and media compatibility before use.
- Review applicable plumbing-code requirements for potable-water installations.
- Refer to the manufacturer dimensional, certification, and material safety documents for additional product information.
Product Documents
Frequently Asked Questions
What is a brass cross used for?
A brass cross is used to create a four-way threaded piping junction where multiple piping runs intersect at one fitting.
How many connections does a cross have?
A cross fitting has four threaded connection points arranged as two intersecting piping paths.
What pressure class is this fitting?
This fitting is identified as a 125# lead free brass cross.
Is this fitting lead free?
Yes. The supplied product information states that it conforms with lead-content requirements for lead-free plumbing as defined by the U.S. Safe Drinking Water Act.
What is the certified lead content?
The fitting is identified as containing no more than 0.25 weighted average percent lead.
How is a cross different from a tee?
A cross has four connections and provides two intersecting piping paths, while a tee has three connections with one 90-degree branch from a main run.
Can a cross be used to divide or combine flow?
Yes. Depending on the piping layout and system design, a cross can be used to divide, combine, or redirect flow through multiple connections.
Can this fitting be used in potable-water systems?
The supplied product information states that the fitting conforms with U.S. Safe Drinking Water Act lead-content requirements for lead-free plumbing. Confirm all applicable local plumbing-code and system requirements before installation.
Where can I find fitting dimensions?
Use the Import Brass Fitting Dimensions document in the Product Documents section above.
Where can I verify the lead-free certification?
Use the Import Brass Fitting Certification Letter provided in the Product Documents section above.
Is material safety information available?
Yes. A manufacturer Material Safety Data Sheet is provided in the Product Documents section above.
Ask Willy: Product Selection & Support
Our GetPipe.com team can help review sizing, material, connection requirements, and product information before you order.
