ASC
150 lb. Ductile Iron Flanged Bull Head Tee
- SKU:
- 38BT1
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
150 lb. Ductile Iron Flanged Bull Head Tee
ASC / SCI FIG 38BT1 150 lb. Ductile Iron Flanged Bull Head Tee provides a three-way flanged connection with an enlarged branch configuration for compatible industrial, mechanical, and waterworks piping systems.
FIG 38BT1 is part of the SCI flanged fitting family, with applicable ductile iron configurations conforming to ASTM A536 and flanged fitting dimensions conforming to ASME B16.42 and ANSI/AWWA C110/A21.10.
Product Highlights
- ASC / SCI FIG 38BT1
- Bull head tee configuration
- Three flanged connections
- Enlarged branch design
- UL Listed through 12"
- Galvanizing available upon request
Technical Specifications
| Product Type | Flanged Bull Head Tee |
|---|---|
| Brand | ASC / SCI |
| Figure | 38BT1 |
| Configuration | Bull Head Tee |
| Connection Type | Flanged |
| Number of Connections | Three |
| Branch Configuration | Enlarged Branch |
| Material | Ductile Iron for Applicable Class 150 Configurations |
| Material Standard | ASTM A536 |
| Flanged Fitting Standard | ASME B16.42 |
| Waterworks Standard | ANSI/AWWA C110/A21.10 |
| Listing | UL Listed Through 12" |
| Optional Finish | Galvanizing Available Upon Request |
Construction Details
FIG 38BT1 uses a bull head tee configuration in which the branch connection is larger than the run connections, providing a compact transition and branching point within a flanged piping system.
Applicable Class 150 configurations use ductile iron conforming to ASTM A536. SCI specifies applicable flanged fitting dimensions to ASME B16.42 and ANSI/AWWA C110/A21.10.
The bolted flange connections provide accessible joints for installation and servicing. Galvanizing is available upon request where an alternate protective finish is required.
Design & Typical Applications
Bull Head Tee Design
- Three-way piping connection
- Enlarged branch configuration
- Flanged end connections
- Heavy-duty fitting design
- Serviceable bolted joints
Typical Applications
- Water distribution systems
- Industrial piping
- Mechanical piping systems
- Pump and valve assemblies
- Compatible utility systems
Installation & Selection Considerations
- Confirm all three flange sizes.
- Verify the enlarged branch orientation.
- Use compatible flange gaskets.
- Support adjoining piping properly.
- Confirm system service requirements.
Use the supplied flange specifications to review flange information and help confirm compatibility when selecting the correct FIG 38BT1 flanged bull head tee for your piping system.
Need Help Selecting a Ductile Iron Flanged Bull Head Tee?
Need help confirming flange sizes, enlarged branch orientation, material requirements, gasket selection, or compatibility with your piping system? The GetPipe.com Team can help.
Frequently Asked Questions
What is the figure number for this flanged bull head tee?
The ASC / SCI 150 lb. Ductile Iron Flanged Bull Head Tee is FIG 38BT1.
What is a bull head tee?
A bull head tee is a three-way fitting with a branch connection larger than the run connections.
What connections does FIG 38BT1 use?
FIG 38BT1 uses three flanged connections for joining compatible flanged piping components.
What material is used for the Class 150 configuration?
Applicable Class 150 configurations are manufactured from ductile iron conforming to ASTM A536.
What standards apply to the flanged fitting?
Applicable SCI ductile iron flanged fitting dimensions conform to ASME B16.42 and ANSI/AWWA C110/A21.10.
Is FIG 38BT1 UL Listed?
SCI identifies its flanged fitting family as UL Listed through 12 inches.
Can the bull head tee be galvanized?
Yes. ASC / SCI identifies galvanizing as available upon request.
What should I confirm before ordering?
Confirm all connection sizes, enlarged branch orientation, material and class, mating flange requirements, and intended system service.
Important Ordering & Installation Notes
- Confirm all three flange sizes.
- Verify the branch orientation.
- Use compatible flange gaskets.
- Support connected piping properly.
- Confirm material and fitting class.
