Spears
1-1/2" PVC DWV Male Trap Adapter w/ Plastic Nut and Washer (SPG x SLIP)
- SKU:
- P103R-015
- Availability:
- Usually Ships Same Day
- Weight:
- 0.13 LBS
Description
1-1/2" PVC DWV Male Trap Adapter w/ Plastic Nut and Washer (SPG x SLIP)
1-1/2" PVC DWV Male Trap Adapter w/ Plastic Nut and Washer (SPG x SLIP) provides a transition between compatible PVC DWV piping and a 1-1/2" slip-joint drainage connection. The fitting combines a spigot connection with a slip connection and includes a plastic nut and washer for the serviceable trap-side joint.
The 1-1/2" SPG x SLIP male trap adapter configuration provides a compact transition at compatible fixture drainage and trap connections. Selection should account for the 1-1/2" nominal size, spigot and slip interfaces, adjoining components, nut and washer arrangement, joining requirements, piping alignment, and available service clearance.
Product Highlights
- PVC construction
- DWV fitting design
- 1-1/2" nominal size
- Male trap adapter
- Spigot x slip configuration
- Includes plastic nut and washer
- Provides a serviceable trap connection
- Provides a transition between a receiving hub and compatible slip connection
Technical Specifications
| Product Type | Male Trap Adapter |
|---|---|
| Material | PVC |
| System Type | DWV |
| Nominal Size | 1-1/2" |
| Connection | Spigot x Slip (SPG x SLIP) |
| Connection Count | Two |
| Fitting Configuration | Male Trap Adapter |
| Spigot Interface | Compatible Receiving Hub |
| Slip Interface | Compatible Slip-Joint Component |
| Included Components | Plastic Nut and Washer |
| Joining Method | Compatible PVC DWV Joining x Slip-Joint Connection |
| Primary Function | Provide a Transition Between a Compatible Receiving Hub and Slip-Joint Drainage Connection |
Trap Adapter Design
The male trap adapter configuration provides a transition between a compatible PVC DWV receiving hub and a serviceable slip-joint connection. This arrangement allows compatible fixture or trap components to connect to the drainage piping while retaining future service access.
The adapter should be positioned so the spigot and slip-side components align naturally before final assembly. Planning the installation helps coordinate trap position, adjoining piping, nearby components, and available working clearance.
Spigot & Slip Connections
The spigot connection fits into an appropriately sized compatible receiving hub, while the slip connection interfaces with the compatible adjoining slip-joint component. Each connection should be matched to the intended component before assembly.
The spigot side should be prepared using the appropriate PVC DWV joining procedure. The slip side should be assembled with the supplied plastic nut and washer positioned correctly for the intended serviceable connection.
Plastic Nut & Washer
The plastic nut and washer are included for the slip-side connection of the trap adapter. Together they provide the components used to secure and seal the compatible adjoining slip-joint connection.
The washer should be positioned correctly and the nut should be started carefully during assembly. The connection should remain accessible where future adjustment, inspection, or disassembly may be required.
PVC DWV Integration
The PVC DWV construction allows the trap adapter to integrate into compatible drain, waste, and vent piping arrangements. Matching the 1-1/2" size and both connection interfaces to the adjoining components helps maintain the intended drainage configuration.
Application suitability should be evaluated using the requirements of the complete DWV system. Connection compatibility, adjoining materials, trap alignment, joining materials, service access, and local installation requirements should all be considered during fitting selection.
Installation & Selection Considerations
- Confirm the 1-1/2" size.
- Verify the SPG x SLIP arrangement.
- Check PVC DWV compatibility.
- Confirm the nut and washer configuration.
- Maintain access to the slip connection.
Our PVC fitting specialists can help review the 1-1/2" size, DWV requirements, SPG x SLIP configuration, adjoining receiving hub, slip connection, plastic nut and washer, trap alignment, and available service clearance before you order.
Frequently Asked Questions
What is this PVC DWV Male Trap Adapter used for?
It provides a transition between a compatible PVC DWV receiving hub and a serviceable slip-joint drainage connection.
What size is this adapter?
This product is specified as a 1-1/2" male trap adapter.
What does SPG x SLIP mean?
It identifies a spigot connection at one end and a slip connection at the other.
Are the nut and washer included?
Yes. This configuration includes a plastic nut and washer for the compatible slip-side connection.
Should the slip connection remain accessible?
Yes. Reasonable access should be maintained where future adjustment, inspection, or disassembly may be required.
What should I confirm before ordering?
Confirm the 1-1/2" size, SPG x SLIP arrangement, PVC DWV compatibility, adjoining components, and nut and washer configuration.
Important Ordering & Installation Notes
- Inspect both connections before use.
- Confirm the 1-1/2" nominal size.
- Verify the plastic nut and washer.
- Align adjoining components carefully.
- Maintain access for future service.
