Merit Stainless Weld Fittings

Stainless Steel Long Radius Weld 90° Elbow Schedule 10 and 40 material is manufactured and tested in accordance with ASTM A403, ASME SA403/SA403M Wall Thicknesses are in accordance with ANSI B16.9, B16.28, and MSS SP-43 Raw material is in accordance...

Stainless Steel Short Radius Weld 90° Elbow Schedule 10 and 40 material is manufactured and tested in accordance with ASTM A403, ASME SA403/SA403M Wall Thicknesses are in accordance with ANSI B16.9, B16.28, and MSS SP-43 Raw material is in...

Stainless Steel Weld Cap Schedule 10 and 40 material is manufactured and tested in accordance with ASTM A403, ASME SA403/SA403M Wall Thicknesses are in accordance with ANSI B16.9, B16.28, and MSS SP-43 Raw material is in accordance with A312 Stainless...

Stainless Steel Weld Concentric Reducer Schedule 10 and 40 material is manufactured and tested in accordance with ASTM A403, ASME SA403/SA403M Wall Thicknesses are in accordance with ANSI B16.9, B16.28, and MSS SP-43 Raw material is in accordance with...

Stainless Steel Weld Type "A" Stub End   Type A – Type “A” Stub Ends are for use with standard Lap Joint Flanges. The Lap thickness on the Stub End is greater than, or equal to, the nominal thickness of the pipe wall. ...

Stainless Steel Weld Tee Schedule 10 and 40 material is manufactured and tested in accordance with ASTM A403, ASME SA403/SA403M Wall Thicknesses are in accordance with ANSI B16.9, B16.28, and MSS SP-43 Raw material is in accordance with A312 Stainless...

Stainless Steel Weld 45° Elbow Schedule 10 and 40 material is manufactured and tested in accordance with ASTM A403, ASME SA403/SA403M Wall Thicknesses are in accordance with ANSI B16.9, B16.28, and MSS SP-43 Raw material is in accordance with A312 ...

Stainless Steel Weld Reducing Tee Schedule 10 and 40 material is manufactured and tested in accordance with ASTM A403, ASME SA403/SA403M Wall Thicknesses are in accordance with ANSI B16.9, B16.28, and MSS SP-43 Raw material is in accordance with A312 ...

Sch10 Stainless Steel Weld Type "C" Stub End MSS  Type C – Type “C” Stub Ends are for use with standard Lap Joint Flanges and Slip on Flanges. The Lap of a Type "C" is flared leaving a rounded edge at the I.D. of the Lap. If...

Stainless Steel Weld Eccentric Reducer Schedule 10 and 40 material is manufactured and tested in accordance with ASTM A403, ASME SA403/SA403M Wall Thicknesses are in accordance with ANSI B16.9, B16.28, and MSS SP-43 Raw material is in accordance with...