Shurjoint

Grooved Standard "C" Gaskets - EPDM Gaskets fit Shurjoint Coupling Model Numbers: Z07, 7705 & 7707 Shurjoint Grade "E" EPDM is compounded per ASTM D2000 designation 2CA615A25B24F17Z. Peroxide curing and post curing give a higher crosslink density,...

Grooved Standard "T" Gaskets - Nitrile Good for petroleum oils, mineral oils, vegetable oils, non-aromatic hydrocarbons, many acids and water ≤+150°F (+65°C) Max Temp. Range: -20°F (-29°C) to +180°F (+82°C) Gaskets fit...

Plain End "WILDCAT" Coupling - Grade E EPDM Gaskets for water services The Shurjoint Model 79 “Wildcat” coupling is designed to mechanically to join plain-end or beveled end carbon steel pipe.  The “Wildcat”...

M07 Quick Install Coupling With our M07 Rigid Coupling, Shurjoint is entering into the ready-to-install Coupling arena, and we have made improvements upon those already there. The M07 also ensures uniform gasket support/stability with our patent-pending...

Model Z07 Heavy Duty Rigid Coupling The Shurjoint Model Z07 is an angle-pad design rigid coupling for general piping applications where rigidity is required including, mechanical rooms, valve connections fire mains and long straight runs. The angle-pad...

Model 7705 Flexible Coupling The Shurjoint Model 7705 is a standard flexible coupling designed for use in a variety of moderate pressure general piping applications. The Model 7705 coupling features flexibility that can accommodate misalignment,...

7707 Heavy Duty Flexible Coupling The Model 7707 Flexible Coupling is designed for use in a variety of general piping applications ofmoderate or high pressure services. Working pressure is usually dictated by the wall thickness and rating of the pipe...

G28 Hinged Lever Coupling The Model G28 Hinged Grooved Coupling is designed for quick connect and disconnect services. The housing segments are hinged with a lever handle for easy assembly. The use of the split pin can secure and prevent the accidental...

7706 Heavy Reducing Coupling The Model 7706 Reducing Coupling allows direct reduction on a piping run and eliminates the need for a concentric reducer and couplings. The specially designed rubber gasket prevents the smaller pipe from telescoping into the...

C-7 Outlet Coupling The Model C-7 Outlet Coupling combines the features of a coupling and a reducing outlet. The C-7 is a joining device with an integral reducing outlet, eliminating the need for a mechanical tee or a reducing tee and couplings. The C-7...

7041 Flange Adapter - ANSI Class 125/150 The Model 7041 Flange Adapter allows for a direct connection with ANSI class 125/150 flanges. The specially designed gasket enables the transition from a grooved system to a flanged system or component with this...

7043 Flange Adapter - ANSI Class 300 The Model 7043 flange adapter allows for a direct connection with ANSI Class 300 flanges. The specially designed gasket enables the transition from a grooved system to a flanged system or component with this single...

49 Sandwich Plate - Electro Zinc Plated The Model #7041, #7043, #C341 & #A512 flange adapters require a hard flat surface for effective gasket sealing. A sandwich plate is required and should always be used when the mating surface is not adequate as...

7180 Universal Flange Adapter The Model 7180 Universal Flange Adapter provides all the benefits of our popular #7170 Flange Adapter with the added benefit of mating to a range of flange types including ANSI 125/150, PN10, PN16, JIS 10K and BS- 10E...

7181 Universal Reducing Flange Adapter The Model 7181 Universal Reducing Flange Adapter provides for a rigid transition between a flanged piping system and a one or two-size reduced grooved system without the use of a concentric reducer. The flange...

7721 Mechanical Tee Female Threaded Outlet The Model 7721 Mechanical Tee when mounted on hole cut pipe provides a fast and easy mid-pipe threaded branch outlet. By utilizing the Model 7721 you eliminate the need for welding or the use of multiple...

7722 Mechanical Tee Grooved-End Outlet The Model 7721 Mechanical Tee when mounted on hole cut pipe provides a fast and easy mid-pipe threaded branch outlet. By utilizing the Model 7721 you eliminate the need for welding or the use of multiple fittings...

90° Grooved Elbow - Regular Radius Shurjoint grooved-end elbows are made of ductile iron per ASTM A536 Gr. 65-45-12 and or ASTM A395 Gr. 65-45-15. C-E dimensions are manufacturer’s standard. Shurjoint standard fitting pressure ratings conform...

7111 45° Grooved Elbow - Regular Radius Shurjoint grooved-end elbows are made of ductile iron per ASTM A536 Gr. 65-45-12 and or ASTM A395 Gr. 65-45-15. C-E dimensions are manufacturer’s standard. Shurjoint standard fitting pressure ratings...

7112 22-1/2° Grooved Elbow Shurjoint grooved-end elbows are made of ductile iron per ASTM A536 Gr. 65-45-12 and or ASTM A395 Gr. 65-45-15. C-E dimensions are manufacturer’s standard. Shurjoint standard fitting pressure ratings conform to the...

7113 11-1/4° Grooved Elbow Shurjoint grooved-end elbows are made of ductile iron per ASTM A536 Gr. 65-45-12 and or ASTM A395 Gr. 65-45-15. C-E dimensions are manufacturer’s standard. Shurjoint standard fitting pressure ratings conform to the...

7120 Grooved Tee Shurjoint grooved-end fittings are made of ductile iron per ASTM A536 Gr. 65-45-12 and or ASTM A395 Gr. 65-45-15. C-E dimensions are manufacturer’s standard. Shurjoint standard fitting pressure ratings conform to the ratings of...

7130 Grooved 45° Lateral Shurjoint grooved-end fittings are made of ductile iron per ASTM A536 Gr. 65-45-12 and or ASTM A395 Gr. 65-45-15. C-E dimensions are manufacturer’s standard. Shurjoint standard fitting pressure ratings conform to the...

7135 Grooved Cross Shurjoint grooved-end fittings are made of ductile iron per ASTM A536 Gr. 65-45-12 and or ASTM A395 Gr. 65-45-15. C-E dimensions are manufacturer’s standard. Shurjoint standard fitting pressure ratings conform to the ratings of...

7121 Grooved Reducing Tee Shurjoint grooved-end reducing tees are made of ductile iron per ASTM A536 Gr. 65-45-12 andor ASTM A395 Gr. 65-45-15. C-E dimensions are manufacturer’s standard. For sizes larger than 14” (350 mm) are fabricated from...

7150 Grooved Concentric Reducer Shurjoint grooved-end reducers are made of ductile iron per ASTM A536 Gr. 65-45-12 and or ASTM A395 Gr. 65-45-15. C-E dimensions are manufacturer’s standard. For sizes larger than 14” (350 mm) are fabricated...

7151 Grooved Eccentric Reducer Shurjoint grooved-end reducers are made of ductile iron per ASTM A536 Gr. 65-45-12 and or ASTM A395 Gr. 65-45-15. C-E dimensions are manufacturer’s standard. For sizes larger than 14” (350 mm) are fabricated...

7160 Grooved End Cap Shurjoint grooved-end fittings are made of ductile iron per ASTM A536 Gr. 65-45-12 and or ASTM A395 Gr. 65-45-15. C-E dimensions are manufacturer’s standard. 7160 Cap Submittal Sheet PDF Shurjoint Technical Data PDF Shurjoint...

7160H Grooved Domed End Cap Shurjoint grooved-end fittings are made of ductile iron per ASTM A536 Gr. 65-45-12 and or ASTM A395 Gr. 65-45-15. C-E dimensions are manufacturer’s standard. 7160 Cap Submittal Sheet PDF Shurjoint Technical Data PDF...

7160T Grooved Transition Cap The Model 7160T grooved x threaded transition fitting can be the ideal fitting when transitioning from a larger grooved pipe to a smaller threaded pipe such as 6" x 1", 4" x 1" etc. The 7160T can be used as an alternative to...

7150M Grooved-End Reducing Nipple The Shurjoint Models 7150F & 7150M are designed for making direct reduction from a grooved system to female or male threaded system without the need for expensive swaged nipples. Shurjoint ductile iron grooved-end...

7150F Grooved Reducing Socket Adapter The Shurjoint Models 7150F & 7150M are designed for making direct reduction from a grooved system to female or male threaded system without the need for expensive swaged nipples. Shurjoint ductile iron...

55 Grooved Nipple Adapter Great item for tranistioning from pipe thread to grooved. Shurjoint ductile iron grooved-end fittings are made of ductile iron per ASTM A536 Gr.65-45-12 and or ASTM A395 Gr. 65-45- 15. C-E dimensions are manufacturer’s...

SJ-726 Grooved Y-Strainer The VSH Shurjoint Model 726 Grooved-end Y-Strainers are designed to strain debris and foreign matter from piping systems and thus provide inexpensive protection for costly pumps, meters and other components. The VSH Shurjoint...

SJ-900 Grooved End Swing Check Valve The Shurjoint Model SJ-900 Swing Check Valve is a grooved-end check valve featuring a spring loaded wide-open clapper and a non-stick leak tight EPDM rubber seal. With a rated working pressure of 300 psi, the valve...

Grooved Butterfly Valve - Lever Operated The Model SJ-300N Butterfly Valve is a grooved-end tight shut-off valve designed, manufactured and tested to MSS SP-67.  The valve can be shipped either with a 10-position lever handle with a locking device...

Grooved Butterfly Valve - Gear Operated The Model SJ-300N Butterfly Valve is a grooved-end tight shut-off valve designed, manufactured and tested to MSS SP-67. The valve can be shipped either with a 10-position lever handle with a locking device...