Titan

Titan Flow Control CV 31-DI Ductile Iron Single Disc Wafer Type Swing Check Valve - ASME Class 150

(No reviews yet) Write a Review
Weight:
2.50 LBS
*Images are for visual reference only.
  • Titan Flow Control CV 31-DI Ductile Iron Single Disc Wafer Type Swing Check Valve - ASME Class 150
  • Titan Flow Control CV 31-DI Ductile Iron Single Disc Wafer Type Swing Check Valve - ASME Class 150
  • Titan Flow Control CV 31-DI Ductile Iron Single Disc Wafer Type Swing Check Valve - ASME Class 150
  • Titan Flow Control CV 31-DI Ductile Iron Single Disc Wafer Type Swing Check Valve - ASME Class 150
  • Titan Flow Control CV 31-DI Ductile Iron Single Disc Wafer Type Swing Check Valve - ASME Class 150
  • Titan Flow Control CV 31-DI Ductile Iron Single Disc Wafer Type Swing Check Valve - ASME Class 150
$142.56 - $788.46

Represents the combined quantity sold of all the sizes under this product SKU.
Sold:

Description

Titan Flow Control CV 31-DI Ductile Iron Single Disc Wafer Type Swing Check Valve - ASME Class 150

  • Sizes: 2 - 8 in. - Larger sizes available - Please call for more information
  • Type: Wafer - Single Disc
  • ASME Class: 125/150
  • Body: Ductile Iron (ASTM A536)
  • Seat: Nitrile Rubber
  • Disc: Stainless Steel
  • ASME Class 150 Pressure/Temperature Rating: 250 PSI @ 100°F
  • Nitrile Rubber Temp. Range: -20 - 250°F
  • Stainless Steel Spring Temp. Rating: 450°F
  • Low Cracking Pressure: 1/4 PSI
  • Referenced Standards & Codes: ASME B16.42- Ductile Iron Pipe Flanges and Flanged Fittings; ASME B16.5 - Pipe Flanges and Flanged Fittings; API 594 - Wafer, Wafer-Lug, & Double Flanged Type Check Valve; API 598 - Valve Inspection and Testing; MSS SP-6 - Standards Finishes for Connecting-end Flanges; MSS SP-25 - Standard Marking System for Valves; MSS SP-55 - Quality Standard for Valve Castings
  • Markets: General Industry, Chemical, Petrochemical, Power, and Food & Beverage
  • Specifications Sheet Pdf

Check valves are automatic shut-off valves that are commonly used for preventing backflow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protects against backflow, which could harm the pump and/or other equipment.

Note: This valve is intended for liquid service that is steady, clean (no abrasives or solids), and non-pulsating. Flow-rate must not exceed 15 ft/sec. Not recommended for sever ozone-resistant applications.

View AllClose

Related Products

Reviews