Titan Flow Control YS 56-BZ Soldered Ends Bronze Y-Strainer - ANSI Class 125

• Sizes: 1/4 - 3 in.
• End Type: Solder
• Material: Bronze (C84400) ASTM B584
• Type: Y (Wye) Strainer
• ANSI Class: 125
• Pressure/Temperature Rating- Sizes 1/4 - 1 1/2 in.: 400 PSI @ 100°F
• Pressure/Temperature Rating- Sizes 2 - 3 in.: 315 PSI @ 100°F
• Referenced Standards & Codes: ASME/ANSI B16.15 Cast Bronze Threaded Fittings; ASME/ANSI B16.18 Cast Copper Alloy Solder Joint Pressure Fittings; ASME ANSI B16.50 Copper Alloy Braze-Joint Pressure Fittings
• 1/4 - 2 in. Standard Screen Selections:
• Liquid: 20 Mesh
• Open Area: 51.8%
• 2 1/2 - 3 in. Standard Screen Selections:
• Liquid: 1/16 (.0625)
• Open Area: 41%

• Y Strainer - Installation - Operation - Maintenance Manual PDF 

• Titan Flow Control Screen Order Forms PDF

Titan Flow Control's ANSI Class 125 Bronze Y-Strainers are installed in a piping system to remove unwanted debris from the pipeline, protecting expensive equipment downstream such as pumps, meters, spray nozzles, compressors, turbines, and much more. Y strainers can be installed in a horizontal or vertical pipeline as long as the screen is in a downward position. Straining is accomplished via an internal perforated or mesh lined straining element, the size which should be determined based on the size of the smallest particle to be removed.

Replacement screens and gaskets available. Please call 1 (800) 333-3331 for more information.

Note: The straining element needs regular cleaning to prevent debris build up. It is not advisable to allow the differential pressure to increase by 20 PSI. Although cleaning normally requires the removal of the straining element, installing and using a Titan Blow-Off Drain Valve can increase the time between cleanings.