Titan

Titan Flow Control CV 90-DI Ductile Iron Wafer Type Check Valve w/ Bronze Disc & Nitrile Rubber Seat - ASME Class 150/300

(No reviews yet) Write a Review
Weight:
4.50 LBS
*Images are for visual reference only.
  • Titan Flow Control CV 90-DI Ductile Iron Wafer Type Check Valve w/ Bronze Disc & Nitrile Rubber Seat - ASME Class 150/300
  • Titan Flow Control CV 90-DI Ductile Iron Wafer Type Check Valve w/ Bronze Disc & Nitrile Rubber Seat - ASME Class 150/300
  • Titan Flow Control CV 90-DI Ductile Iron Wafer Type Check Valve w/ Bronze Disc & Nitrile Rubber Seat - ASME Class 150/300
  • Titan Flow Control CV 90-DI Ductile Iron Wafer Type Check Valve w/ Bronze Disc & Nitrile Rubber Seat - ASME Class 150/300
  • Titan Flow Control CV 90-DI Ductile Iron Wafer Type Check Valve w/ Bronze Disc & Nitrile Rubber Seat - ASME Class 150/300
  • Titan Flow Control CV 90-DI Ductile Iron Wafer Type Check Valve w/ Bronze Disc & Nitrile Rubber Seat - ASME Class 150/300
$122.96 - $1,620.72

Represents the combined quantity sold of all the sizes under this product SKU.
Sold:

Description

Titan Flow Control CV 90-DI Ductile Iron Wafer Type Check Valve w/ Bronze Disc & Nitrile Rubber Seat - ASME Class 150/300

  • Sizes: 2 - 8 in. - Larger sizes available - Please call for more information
  • Type: Wafer - Center Guided
  • ASME Class: 150/300
  • Body: Ductile Iron (ASTM A536)
  • Trims: Bronze
  • Seat: Nitrile Rubber
  • Pressure/Temperature Rating:
    • ASME Class 150 (2 - 12 in.): 250 PSI @ 100°F
    • ASME Class 300 (2 - 6 in.): 640 PSI @ 100°F
  • Low Cracking Pressure: 1/2 PSI
  • Seat & Gasket Temp. Range:
    • Nitrile Rubber: -20 - 250°F
    • Viton: -40 - 400°F
  • Stainless Steel Spring Temp. Rating: 450°F
  • Referenced Standards & Codes: ASME B16.42 - Ductile Iron Pipe Flanges and Flanged Fittings; ASME B16.5- Pipe Flanges and Flanged Fittings; MSS SP-6 - Standards Finishes for Connecting-end Flanges; MSS SP-25 - Standard marking System for Valves; MSS SP-125 - D.I., In-Line, Spring Loaded, Center Guided Valves; FM Approvals Class 1230 - Anti-Water Hammer Check Valves (2 - 12 in.)
  • Markets: Oil & Gas Production, General Industry, Chemical, Petrochemical, Power, Food & Beverage
  • Globe Style - Silent Check Valve Installation - Operation - Maintenance Guide Pdf

Check valves are automatic shut-off valves that are commonly used for preventing backflow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protects against backflow, which could harm the pump and/or other equipment.

Note: This valve is intended for liquid service that does not exceed 10 ft/sec. It is designed for steady flow conditions and is not recommended for use in reciprocating pump, compressor or other type of physical/thermal shock-load applications. This valve is not recommended for steam service or flow media that contains solids. It should be installed at least five pipe diameters downstream from any turbulence producing components. Flow straighteners may be required in certain applications.

View AllClose

Related Products

Reviews