Beam Clamps

Fig. 62 Small Mouth Beam Clamp Designed to attach hanger rod to the top or bottom flange of a beam or bar joist where flange thickness does not exceed 5/8 of an inch. Empire Figure 62 - Small Mouth Beam Clamp Submittal (Sizes 3/8" -1/2") PDF Empire...

Fig. 61 Wide Mouth Beam Clamp Empire’s Fig. 61 Wide Mouth Beam Clamp is designed to attach hanger rod to the top or bottom flange of a beam or bar. Empire Figure 61 - Wide Mouth Beam Clamp Submittal (Sizes 3/8" -1/2") PDF Empire Figure 61 –...

Fig. 23L Malleable Iron C-Clamp With Locknut Empire’s 23L Malleable Iron C- Clamp is designed for attaching hanger rod to the bottom flange of a beam. Empire Figure 23L - Malleable Iron C-Clamp with Locknut Sumbittal PDF

Fig. 21L Steel C-Clamp Empire’s 21 and 21L Steel C-Clamps are designed for attaching hanger rod to the bottom flange of a beam. Features the ribbed design for added strength. Hardened steel cup point set screw secures clamp to beam. Stainless steel...

Fig. 218 Malleable Iron Center Load Beam Clamp Designed for the suspension of a hanger rod from the center of an I-beam. The clamp accommodates flange widths of 2-3/8” - 7”. Flange thickness not to exceed .60 inches. Normally used in...

Fig. 159 Adjustable Rod Beam Clamp Designed to be used in the suspension of a hanger rod from an Ibeam. Recommended for flange widths from 4 inches minimum to 8 inches maximum. Empire Figure 159 Adjustable Rod Beam Clamp Submittal PDF

Fig. 63 Electrical Rod Support Clamp Empire’s Fig. 63 Electrical Rod Support Clamp is designed to attach hanger rod to beam or framework where thickness does not exceed 1/2 inch. Rod tap on front and back of clamp. Empire Figure 63 Electrical Rod...

1/4" Electro-Galvanized Beam Clamp Empire’s Fig. 60G 1/4″ Beam Clamp is designed to attach 1/4” hanger rod from metal beams, channel or angle iron. Empire Figure 60G 1/4" Electro-Galvanized Beam Clamp Submittal PDF

3/8" Purlin Clamp w/Locknut Empire’s Fig. 24L Purlin Clamp is designed for attaching hanger rod to large-lip steel Purlin beams. Empire Figure 24L 3/8" Purlin Clamp Submittal PDF

Fig. 22R Plain Steel Retaining Strap Empire’s Fig. 22R Retaining Strap is designed for use with Fig. 61 Wide Mouth and Fig. 62 Small Mouth Beam Clamps. Add 2” minimum to flange width to determine length. Empire Figure 22R...

Fig. 21R Retaining Strap - Plain Carbon Steel Empire’s 21R Retainting Strap is designed for use with figure FIG. 21, FIG. 21L (3/8”-3/4”) and FIG. 23L (3/8”and 1/2”) to eliminate movement of the beam...

Fig. 153 Side Beam Clamp Designed for mounting to sides of wood beams using drive screws. Bottom hole is tapped for rod. Empire Figure 153 Side Beam Clamp Submittal PDF